Products

Products • October 25, 2016

Revolution LM Series Coordinate Measuring Machines

When it comes to coordinate measuring machines, manufacturers want less downtime and lower cost of ownership. In response to customer feedback OEM AIMS Metrology has designed and introduced a linear motor-driven CMM with 5-axis measurement capabilities.

Products • October 25, 2016

ABC Automatic Lathe

The dynamic new generation of the ABC machine from INDEX is ideal for turning out simple to moderately complex parts in cycle times up to 15% faster than the previous generation with rapid spindle acceleration (8 g), shorter spindle ramp-up times, higher rapid traverse rates, and quick chip to chip times, according to the company. Ideal for runs from 5,000 to 50,000 parts in the 42 to 60 mm range, the machine's combination of features supports a low production cost per piece, even for complex parts.

Products • October 25, 2016

GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms

J.W. Winco, Inc. offers GN 417 metric zinc die-cast indexing plunger latch mechanisms with rest position. The RoHS compliant indexing plunger latch mechanisms are used for applications where the plunger has to stay in its retracted position.

Products • October 25, 2016

M612 Facemill

Sandvik Coromant has introduced its M612 facemill, a product engineered specifically for the roughing stainless steel turbo housings. The tool's positive geometry has the effect of providing a smoother cutting action, which helps machine shops to eliminate vibration.

Products • October 25, 2016

Elevated-Temperature Hard Hat H-700T

In challenging, elevated-heat conditions you need safety equipment that stands up to the heat and helps keep workers comfortable. Designed for workers in industries such as metalworking, smelting and glass manufacturing, with radiant heat environments, 3M Personal Safety Div. has launched the new 3M elevated-temperature hard hat H-700T series.

Products • October 25, 2016

EL72x1-9014 EtherCAT Servo Terminals

To increase safety technology in motion control applications, the new EL72x1-9014 EtherCAT servo terminals from Beckhoff implement STO (Safe Torque Off) functionality. The integrated features correspond to safety level Cat 3/PL d, according to EN ISO 13849-1:2015.

Products • October 24, 2016

KBDM PCD Facemilling Platform

Anyone who's replaced a head gasket on an internal combustion engine knows a smooth, flat surface on both cylinder head and block is needed for proper operation. No one understands this better than automakers, who strive for predictable, controlled surface finishes and high production output, together with maximum tool life and the lowest tooling cost per machined component.

Products • October 19, 2016

Video Edge Detection Calibration Slide

A VED (Video Edge Detection) Calibration Slide makes it simple to calibrate pixel size of a camera within a video measuring machine, and is available from HEIDENHAIN Corp. While machines typically are set up at the time of installation, it is good practice to keep tools on-hand in case calibrations are lost or verification of the accuracy of the measuring system is necessary.

Products • October 19, 2016

LOXrail Round Rail System

Launching the LOXrail program, German manufacturer Losyco provides a round rail system that increases assembly line efficiency for large machine and product manufacturing processes. The new system, characterized by minimal rolling friction, is brought to the market by a team of accomplished intra-logistics industry experts, led by managing director Derek P. Clark. Loads as heavy as several tons can be moved manually or with a small auxiliary drive with much lower energy consumption and much less equipment compared to standard procedures using overhead cranes, SGVs or pallet trucks.

Products • October 19, 2016

Quick Turn-250MSY Turning Center

For those shops looking to boost productivity as well as profitability, Mazak's Quick Turn-250MSY turning center sports several new productivity-enhancing features. These include a new direct-drive turret design, higher torque main spindle, a faster more powerful milling spindle and the MAZATROL SmoothG CNC.

Products • October 18, 2016

CoroMill 415 High-Feed Milling Cutter Offers Enhanced Security

A high-feed milling cutter for diameters 13–25 mm and 0.500–1.000 inches has been introduced by Sandvik Coromant. Among the advantages of using the new CoroMill 415 are enhanced security, thanks to iLock insert seat interface technology, and high metal-removal rates as a result of high cutter density and high feed capacity.

Products • October 18, 2016

KONTEC KSC-F Single-Acting Clamping Vises

The SCHUNK KONTEC KSC-F single-acting clamping vises with fixed jaw, achieves high clamping forces at comparably low torque. Due to the 160 degree "Quick Clamp" force intensifier, workpieces are clamped in less than a second, and the vise is safely locked, making retightening with a torque wrench no longer necessary.