Products

Products • September 15, 2022

Millimess 2000 W(i) and 2001 W(i) Digital Comparators

With practical touch control panels, the new digital comparators offer maximum measuring reliability even in harsh workshop environments. A light tap on the touchscreen is sufficient to safely operate the digital comparators with most commercially available gloves. This eliminates the possibility of measurement errors by accidental adjustment or deformation of the comparator. The full-surface glass display also offers protection against liquids and dirt, which cannot penetrate the sealed housing.

Products • September 15, 2022

Digimar 817 CLT

The Digimar 817 CLT provides a variety of interfaces for saving measurement data. Data transfer is possible both wirelessly and by the new duplex cable via the proven MarConnect data management software. It also allows the transmission of a measuring device ID to ensure the traceability of all measurement results. For measurement reports, users can choose between complete representations in PDF format, sending individual measured values to a PC, Bluetooth printer or saving as a TXT file.

Products • September 15, 2022

SpeedTaps

SpeedTaps are meant to be driven by an impact gun along with an impact socket, for through-hole applications allowing the user to quickly move the tap through the material as the impact gun does its work. The taps are designed with an aggressive starting pitch to catch and start cutting faster than traditional taps.

Products • September 10, 2022

Wireless Rotary Cutting Dynamometer (RCD)

The wireless RCD from Kistler has a 10 kHz sampling rate that allows to capture highly dynamic foot-prints of the measurement in applications with up to 16 000 RPM. Overall, piezoelectric sensors ensure more accurate measurements than other technologies, such as strain-gauge sensors, which have significant limitations especially when measuring small forces and high dynamic processes. Highly accurate measurements are not only important for research but also for production monitoring. The piezoelectric measurement technology can capture very small changes and deviations before they have a significant effect on product quality.

Products • September 10, 2022

New Grades of Tiger·tec Gold Inserts

A patent-pending, highly textured, multi-layered MT-TiCN layer increases toughness and reduces flank face wear, resulting in lower cost per cutting edge. The inserts' highly textured Al2O3 layer also minimizes crater wear, and the gold-colored top layer improves wear detection. The gradient carbide substrate boosts wear resistance and toughness. In addition, Walter provides its signature multi-stage post-treatment. This produces an unusually smooth rake face, reducing friction and also increasing toughness.

Products • September 3, 2022

Combination Bench Lathe and Mill

The 11-inch bench engine lathe and gear head mill is able to handle a wide range of turning, milling and drilling operations typically found on much larger machinery. Constructed from heavy cast iron, its smooth power transmission with precision thrust and ball bearings in the head stock and spindles are designed to provide years of trouble-free operation.

Products • September 3, 2022

VpCI-395 Epoxy Primer

VpCI(r)-395 is Cortec's most durable anticorrosion primer. It not only promotes good surface adhesion between the metal and topcoats, but it also has greater strength as a 2K (two-component) primer. The extra effort that goes into mixing two parts together at the jobsite translates into greater durability because it allows crosslinking, i.e., greater chemical bonding, between the active ingredients in the primer.

Products • September 1, 2022

M50 MILLTURN

The multifunctional turning-boring-milling center is designed for complete machining of complex chuck and shaft parts up to 670 mm swing over bed. Turning, milling, drilling, hobbing, shaping, gun drilling as well as ID machining can be performed under any angle of the tool. The interpolation of up to 5 axes makes machining of any geometrical profile possible. Large safety windows provide the best possible overview of the working area.

Products • September 1, 2022

KYHK15B Ceramic Turning Grade

KYHK15B provides excellent edge stability, high chipping resistance, and a PVD gold coating makes wear progression identification very easy. From smooth and varying depths of cut to heavy depths of cut, KYHK15B can be an economic alternative to PcBN inserts.

Products • August 27, 2022

Tiger·tec Gold PVD Grade

This grade is now capable of longer tool life, greater reliability, and approximately 30 percent greater performance in stainless steels (ISO M) and heat-resistant super alloys (ISO S), and up to 75 percent greater performance in steels (ISO P) than comparable grades. With the launch phase now complete, the PVD grade WSP45G Tiger·tec® Gold can be used universally in all standard Walter milling cutters.

Products • August 26, 2022

Dot Peen Marking Combo Model

The unit control of the Connect.series range, with its compact size, has a large 10'' touch screen in tempered glass and pairs in just a few seconds to the marking head thanks to the RFID technology. It can connect to the network and exchange data with the information system (ERP, MES). Its intuitive software developped by Technomark make marking possible within 3 clicks.

Products • August 26, 2022

Collet for Internal Clamping

Users can machine this collet attachment to adapt it to match the internal contour of the workpiece they are clamping. However, what makes this new exhibit from AMF so special is that no through holes are needed in the workpiece to achieve safe internal clamping. With mechanical lateral actuation, workpieces with a blind hole can also be clamped securely and without distortion.