Videos

Videos • June 28, 2023

CTE Booth Visit with MIKRON Tool @ Eastec

CTE Publisher Dennis Spaeth asks MIKRON Tool's Clive Komlenic, sales director, East, about the company's new micro milling tool, the CrazyMill Cool Micro. The new cutter is said to answer their customer's desire for a micro tool that displayed a lot of the same characteristics as MIKRON's larger mills that start at 1 mm.n

Videos • June 27, 2023

CTE Booth Visits @ Eastec 2023

CTE booth visits captured on video during SME's Eastec 2023 event in Springfield, Massachussetts.

Videos • June 27, 2023

CTE Booth Visit with ZOLLER @ Eastec

Sales Engineer Emily Brunnschweiler provides an overview of the products featured at the ZOLLER Inc. booth during Eastec 2023. On display were the »pomBasic« inspection solution, the »genius« universal measuring system, the »smile 420« tool presetter, the »toolBalancer 550«, the »powerShrink 600«, the »redomatic 400« heat-shrink presetter, as well as a variety of toolholders and tool management solutions.

Videos • June 27, 2023

CTE Booth Visit with Mate Precision Technologies @ Eastec

Workholding Global Product Manager Austin Heisick introduced Mate Precision Technologies' 52/96 zero-point workholding system at the company's booth during Eastec 2023. On display were Mate's DynoGrip Vises, DnyoLock Bases and DynoMount mounting accessories.

Videos • June 1, 2023

Expanded Diameter and Corner Radius in Tungaloy-NTK’s DoMultiRec

DoMultiRec multifunctional milling cutter with center cutting capability enables a single tool to perform multiple milling operations, including shouldering, pocketing and drilling. A uniquely designed insert integrates a center and peripheral cutting edge on one side of the insert; the same insert can be used either for the center or peripheral position for up to four indexings per insert.n

Videos • May 31, 2023

Manufacturer uses Vicivision America M2018 Techno measuring machine

Trenton S.p.A., a manufacturer focused mainly on making parts for machines and tractors used for agriculture, offers a brief testimonial for Vicivision America's M2018 Techno measuring machine. The video, courtesy Vicivision, is presented here as a supplement to the Get With The Program column published in the June 2023 issue of Cutting Tool Engineering magazine.

Videos • May 31, 2023

Hexagon Absolute Arm highlights

When you need to capture complete measurement data on a machined part, noncontact 3D laser scanning is available to provide "The Whole Picture," which is the title of our cover story in the June 2023 issue of Cutting Tool Engineering magazine. Presented here is a video supplement covering the highlights of the Absolute Arm AS1 portable CMM from Hexagon's Manufacturing Intelligence division.

Videos • May 31, 2023

Nikon Metrology L100 Scanner highlights

When you need to capture complete measurement data on a machined part, noncontact 3D laser scanning is available to provide "The Whole Picture," which is the title of our cover story in the June 2023 issue of Cutting Tool Engineering magazine. Presented here is a video supplement covering the highlights of the Nikon Metrology L100 laser scanner.

Videos • May 31, 2023

James Engineerings Max System deburring & chamfering machine

James Engineering, which wrote the "Deburring and Chamfering" article published in the June 2023 issue of Cutting Tool Engineering magazine, offers this video supplement to provide more information about the Broomfield, Colorado-based company and its Max System deburring and chamfering machine.

Videos • May 31, 2023

Robotics Results: 36% Increased Productivity

For the 16th episode of CTE's Robotics Results video series, Fusion | RoboJob-USA President Craig Zoberis filmed an automation setup that helped a shop increase productivity by 36% using a RoboJob-USA Mill-Assist Essential with a Haas Automation Inc. VF-2SS.

Videos • May 24, 2023

CTE Lunch & Learn: Troubleshooting Band Sawing

Jay Gordon, North American Sales Manager Saws and Hand Tools, for The L.S. Starrett Co., share tips on optimizing sawing processes. During an interactive Q&A conversation, Jay covers best practices for cutting challenging materials and offers tips on how to select the right band saw blade. He will also offer recommendations for what every operator should know before starting to make cuts.

Videos • May 3, 2023

Automated Payback video supplement

Video supplement to the "Automated Payback" cover story in the May 2023 issue of Cutting Tool Engineering magazine. Playlist includes videos from Stäubli Corp. and Universal Robots USA.