Videos

Videos • August 3, 2017

The CNC Chef: Toolpath tips | Episode 6

Bob Warfield from CNCCookbook discusses some toolpath tips to help you get the most from your CAM software in the sixth episode of The CNC Chef, a video series produced in collaboration with Cutting Tool Engineering.

Videos • July 21, 2017

Renishaw introduces SPRINT system SupaScan

Renishaw plc recently posted a brief video to YouTube that offers an overview of the company's new SPRINT system with SupaScan. The system is designed for simple integration into machine tool applications requiring exceptionally fast workpiece set-up, and where overall cycle time is critical.

Videos • June 27, 2017

The CNC Chef: Turret vs. gang tooling for CNC lathes | Episode 5

Bob Warfield of the CNCCookbook walks through the benefits of turret versus gang tooling for CNC lathes in the fifth episode of The CNC Chef, a video series presented by Cutting Tool Engineering and CNCCookbook. Warfield offers some insight for those trying to decide which is best for a particular job.

Videos • June 27, 2017

Episode 80: Shop dressing after 5 parts

Using a Norton SG grit wheel, a shop turned to the Grinding Doc to find out why they suddenly lose form on the 7th or 8th part. To prevent bad parts, the shop dresses the wheel after every 5th part.

Videos • June 27, 2017

Sandvik Coromant cast iron face milling demo

CoroMill 745 multi-edge cutter with high feed capability is in this demonstration used for face milling in cast iron. The 25 degree entering angle of this cutter version allows for high feed milling strategies to be utilized. The concept has a double-sided multi-edge design, making it a cost-efficient solution that delivers high productivity.

Videos • May 30, 2017

Episode 79: Stop the burn on CBN wheels

A shop sometimes experiences burn when using a CBN wheel to cylindrically plunge-grind a part. Slowing down doesn't help. Dr. Jeffrey Badger, who writes the Ask the Grinding Doc column for Cutting Tool Engineering magazine, offers a remedy.

Videos • May 30, 2017

YG-1 Spade Drill demonstration

The new Spade Drills from YG-1 are intended for a wide range of applications and raw materials such as steels, stainless steel, cast irons and so on. The indexable drill offer a wide range of diameters: from 9.5mm to 114.3mm. This video demonstration by YG-1 shows normal and slow motion cutting action of the Spade Drill HSS Insert (Ø20.0 / 8xD holder).

Videos • May 22, 2017

The CNC Chef: The impact of tool deflection | Episode 4

Bob Warfield of the CNCCookbook.com analyzes the impact of tool deflection in the fourth episode of The CNC Chef, a video series from Cutting Tool Engineering.

Videos • May 12, 2017

REGO-FIX Tool Corp. opens new HQ in Indiana

Nearly 100 guests including customers, Whitestown and Boone County officials, members of the media and a representative from the Swiss Consulate on May 5 joined REGO-FIX Tool Corporation executives and employees to celebrate the opening of the company's new North American headquarters in Whitestown, Ind.

Videos • May 1, 2017

Benefits of high-feed milling

W.W. Grainger Inc.'s metalworking team put together this brief video on the benefits of high-feed milling as part of the company's Quick Tips video series, which is part of Grainger's online resource center, The Knowledge Center.

Videos • May 1, 2017

Episode 78: What is TG grit?

Dr. Jeffrey Badger, who writes the Ask the Grinding Doc column for Cutting Tool Engineering magazine, offers a closer look at TG grit in the 78th episode of the Grinding Doc video series.

Videos • April 19, 2017

The CNC Chef: Micromachining tool life challenges | Episode 3

Bob Warfield of the CNCCookbook.com addresses tool life issues when micromachining in the third episode of The CNC Chef, a new video series from Cutting Tool Engineering. In this episode, Warfield takes a close look at tool runout, which he says is the No. 1 issue for tool life problems when micromachining.