Skip to content
Browse

Videos

Select one or more.
Select one or more.
Select one or more.
Select one or more.
Select one or more.
Reset
O.M.G. North America Angle Heads and Spindle Speeders O.M.G. North America Angle Heads and Spindle Speeders →

Latest Videos

Episode 5: Cluster diamonds
Video October 14, 2016
Episode 5: Cluster diamonds
Thinking about using cluster diamonds? Grinding Doc Jeffrey Badger suggests going at least 4x faster than with a single-point diamond. Visit The Grinding Doc website for more advice from Dr.
Episode 3: The right grit
Video October 14, 2016
Episode 3: The right grit
In the third episode of the Grinding Doc video series, Jeffrey Badger, Ph.D., takes a look at a common problem shops have with getting the surface finish that they want. Visit The Grinding Doc website for more advice from Dr.
Episode 2: Ceramic abrasive luck?
Video October 14, 2016
Episode 2: Ceramic abrasive luck?
In the second episode of our Grinding Doc video series, Dr. Jeffrey Badger fields a question from a shop that hasn’t had any luck with ceramic abrasive. Visit The Grinding Doc website for more advice from Dr.
Episode 1: Coolant velocity versus flow rate?
Video October 14, 2016
Episode 1: Coolant velocity versus flow rate?
The debut episode of Cutting Tool Engineering magazine's Grinding Doc video series fields a question from a shop wondering about the relationship between coolant velocity versus the flowrate. Dr. Jeffrey Badger, who writes the Ask the Grinding Doc column in Cutting Tool Engineering magazine, takes a look at the coolant issue for CTE Plus.
Episode 32: Grit size
Video October 14, 2016
Episode 32: Grit size
Dr. Jeffrey Badger helps a shop struggling to maintain a 16 µin Ra surface finish using a 60-mesh grit size. On the advice of the wheel supplier, the shop tried 100- and 120-mesh grits only to end up with burned parts. Visit The Grinding Doc website for more advice from Dr.
Episode 12: Burn noticed
Video October 14, 2016
Episode 12: Burn noticed
Dr. Jeffrey Badger, a grinding consultant and author of The Grinding Doc column in Cutting Tool Engineering magazine, helps a grinding shop distinguish between true thermal damage and surface burn. Visit The Grinding Doc website for more advice from Dr.
Episode 22: High-porosity wheel to the rescue?
Video October 14, 2016
Episode 22: High-porosity wheel to the rescue?
A shop with burn issues wants to know if a high-porosity wheel would reduce temperatures as suggested by the company's wheel supplier. Dr. Jeffrey Badger, the columnist for Cutting Tool Engineering's Ask the Grinding Doc column, offers some guidance in the 22nd episode of our Grinding Doc video series.
Episode 18: Feeling the burn
Video October 14, 2016
Episode 18: Feeling the burn
In episode 18 of the Grinding Doc video series, a shop experiencing more wheel wear and burn after switching from one high-speed steel grade to another with lower grindability—requiring slower feedrates—seeks a recommendation for a wheel that won't require the shop to increase cycle time. Dr.
Episode 4: Rotary diamond dressing
Video October 14, 2016
Episode 4: Rotary diamond dressing
Grinding Doc Jeffrey Badger offers insight into rotary diamond dressing for a shop whose parts turn to toast. Visit The Grinding Doc website for more advice from Dr.
Iscar video depicts chip forming
Video October 12, 2016
Iscar video depicts chip forming
The cutting edges of cutting tools don't actually produce chips. Instead, the pressure of a rapidly spinning tool on a workpiece plasticizes part of the parent material, creating a shearing effect that forces the material to ride up the tool.
Heimatec features custom live, static tooling at IMTS 2016
Video September 30, 2016
Heimatec features custom live, static tooling at IMTS 2016
Heimatec President Preben Hansen covers the company's assortment of standard and customized live and static tooling, including angle head and the company's patented UTEC quick-change tooling, during a video interview conducted during IMTS 2016 by Bernard & Company, an industrial advertising and public relations agency.n
Schütte features new 325 linear grinder with robot integration
Video September 30, 2016
Schütte features new 325 linear grinder with robot integration
Thomas Simmich, Schütte LLC's group leader for global medical market sales, is interviewed at IMTS 2016 by Bernard & Company, an industrial advertising and public relations agency. Simmich discusses the company's new 325 linear grinder with collaborative robot integration.

Keep scrolling

1 … 68 69 70 71 72 … 100

Explore

Address:

121 S. Wilke Rd.
Suite 200
Arlington Heights, IL 60005
Phone:
Email:
Author Login | Your Privacy Choices
© 2026 CTE Publications, Inc. All rights reserved. Powered by InnoNet InnoNet