Videos

Sort

Video Type

Select one or more.

Product Category

Select one or more.

Industry

Select one or more.

Operation & Process

Select one or more.

Topic

Select one or more.

Reset

O.M.G. North America Angle Heads and Spindle Speeders →

Latest Videos

Video December 1, 2016

Mast Motorsports Makes Hurco Pitstop

This CTE+ report offers a first-hand account of how two 5-axis CNC milling machines from Hurco North America's helped Mast Motorsports replace some technologically obsolete production equipment.

Video October 28, 2016

‘Going to New Orleans’ — for the USCTI fall meeting

There was plenty to see, eat, drink, learn and hear at the United States Cutting Tool Institute's (www.uscti.com) 2016 Fall Meeting, held Oct. 15-17 at the Omni Royal hotel in New Orleans, writes Cutting Tool Engineering Publisher Don Nelson.

Video October 14, 2016

Episode 31: Adept adapter question

In episode 31, Dr. Jeffrey Badger fields a question from a shop truing its diamond wheels offline, then remounting them onto the non-tapered spindle without using an adapter. The shop is wondering whether its tight wheel tolerances negate the need for an adapter. Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 30: The Grinder’s Toolbox

I’ve been playing around with all these calculations, but they’re a hassle on the shop floor. What can I do? Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 29: Rotating the dressing diamond

A shop asks Dr. Jeffrey Badger, our Grinding Doc columnist, if it is really necessary to rotate the dressing diamond. Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 28: No time to dwell

During rotary plunge dressing, a shop worker is dwelling 2 seconds and would like to know if that’s about the right amount of time. Grinding Doc Jeffrey Badger suggests it isn’t a matter of time. Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 27: Grinding literature

Cutting Tool Engineering magazine’s Grinding Doc columnist Dr. Jeffrey Badger offers some recommendations for instructional and informational grinding literature. Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 26: PM grinding truth

A shop that switched to powder-metallurgy steel after being told it would be easier to grind has found the opposite to be true. The shop turned to Dr. Jeffrey Badger, our Grinding Doc columnist, for the facts. Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 25: Grinding friability

A wheel manufacturer recommended that a machine shop switch from brown alumina to white alumina because the latter is more friable. In this episode, the Grinding Doc analyzes the wisdom of this move. Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 23: All bark, no bite

Grinding Doc Jeffrey Badger fields a question from a shop taking smaller and smaller finishing passes and several spark-out passes in order to get tight tolerances and a good surface finish. But the shop is having trouble getting the wheel to bite into the workpiece.

Video October 14, 2016

Episode 21: Up or down grinding?

For the 21st episode of the Grinding Doc video series on the Cutting Tool Engineering Plus Web site, a shop asked Dr. Jeffrey Badger whether it’s better to up-grind or down-grind? Visit The Grinding Doc website for more advice from Dr.

Video October 14, 2016

Episode 20: Sticking point

A shop grinding tungsten carbide with a resin-bonded diamond wheel asked the Grinding Doc about the difference between two conditioning sticks purchased from two differrent suppliers. With one stick the shop can do a lot more parts between stickings. Why is this? Visit The Grinding Doc website for more advice from Dr.

Keep scrolling

« Previous 1 … 66 67 68 69 70 … 100 Next »

Latest Videos

Explore

Address:

Follow