Videos

A shop that switched to powder-metallurgy steel after being told it would be easier to grind has found the opposite to be true. For some facts, the shop turned to Dr. Jeffrey Badger, the host of Cutting Tool Engineering's Grinding Doc Video Series. Watch the 26th episode now.

The CS-70NC is a CNC automatic carbide cold saw, a high performance sawing solution for cutting high alloy, carbon, non-ferrous, and tool steel grade materials with ease. The Baileigh Industrial machine features a heavy duty design with the carbide saw blade mounted to a ridged blade containment system tied to a heavy hydraulic pivot system (note: servo to ball screw is available if required). This heavy containment system and pivot are said to allow for little vibration producing only the highest tolerances and surface finish, according to the company's YouTube channel.

Platit Inc. recently hosted an open house in Libertyville, Ill., where the Switzerland-based toolcoating company presented cutting-tool and wear-part coating machines based on plasma-generating physical vapor deposition technology. The animation here offers an "insider's" view of the company's coating equipment.

A promotional report prepared by Universal Separators Inc., based in Verona, Wis., provides an in-depth look at the company's SmartSkim coolant recycling system. The company offers a line of SmartSkim products and services to handle skimming and capturing floating oils and other contaminants from industrial process fluids.

Swiss Automation Inc. employs 172 people and runs 115 machines in two locations in Chicago's northwest suburbs. In the past year the company expanded by about 25 percent when it opened its second location, adding some 56 employees and 26 new machines.

A wheel manufacturer recommended that a machine shop switch from brown alumina to white alumina because the latter is more friable. For his 25th episode, Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, analyzes the wisdom of this move.

This short video provides some insight into the benefits and time savings afforded by a universal grinding machine. It is presented as supplemental information to Cutting Tool Engineering's December 2011 cover story, "A Pitch for Thread Grinding."

The Vollmer of America Corp. recently held its PCD Days at its headquarters in Carnegie, Pa. This brief video report offers a glimpse at two of the machines on display during the technical conference: the QXD 200 rotary erosion and QWD760 wire-erosion units.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, responds to a shop that performs high-production grinding of small parts and experiences trouble when determining how much to dress a wheel. Watch the 24th episode now.

The following video, which accompanies an industry news item (below) from the October 2011 issue of Cutting Tool Engineering magazine, provides a brief glimpse of the direct metal laser sintering process for additive metal fabrication.

Video submitted by Fraunhofer Institute shows a testing geometry, or tank, being formed using a tool with different radii at die and punch for researching critical dimensions.

Sandvik Coromant introduced its new CoroMill Plura with iLock system at the imX event at the Las Vegas Convention Center Sept. 12-14. The new system will be available in 2012.