Videos

This CTEplus video report features the Mikron HSM 200U LP 5-axis milling machine, suitable for micromachining and micromilling in the medical and dental industries.

The Mikron HSM LP series from GF AgieCharmilles, which features a sophisticated thermal management system, was among the machines on display at GF AgieCharmilles's 2011 Technology Days held in June at its facility in Lincolnshire, Ill. The MIKRON HSM 400 LP and 400U LP is said to set a new milestone in regard to geometric stability that guarantees extremely high repeatability of movement guidance. Product Manager Eric Ostini provides a brief video tour.

Sandvik Coromant's Global Center for Deep Hole Machining offers a tip for machining the central bore in the main shaft.

Gazing at the wide array of laser ablation, EDMing and 5-axis milling machines on display at GF AgieCharmilles' recent Technology Days 2011, it's easy to understand why the event attracted hundreds of customers from around the world. AgieCharmilles Form 20 sinker EDM debuts.

Eric Ostini, product manager with Agie Charmilles LLC, provides an overview of the FO 550 SP machine designed for fast machining and exceptional surface quality. Part of the company's 2011 Technology Days hosted at its facility in Lincolnshire, Ill., the demonstration includes a dry-run operation depicting a 16"-deep rib burn.

Ken Baeszler, product manager at Agie Charmilles LLC, highlighted the automatic wire changer on the CUT 2000 wire EDMing machine during the company's 2011 Technology Days hosted in June at its facility in Lincolnshire, Ill. The CUT 2000 is said to be capable of achieving finishing quality up to Ra 0.05μm.

Video report features the Form 20 sinker EDM machine, the Mikron HSM 400U LP 5-axis milling machine, and the Cut 300 Sp and Cut 200 mS wire EDM machines. This is a CTEplus Video Supplement to Cutting Tool Engineering magazine's August 2013 issue. New machines make debut at AgieCharmilles 2013 Open House.

For the 21st episode of Cutting Tool Engineering magazine's Grinding Doc Video Series, a shop wondered whether it's better to up-grind or down-grind? Dr. Jeffrey Badger, the host of the video series, responds.

Inspection is a crucial process in the making of safety-critical medical components. One shop offers a glimpse into its process.

A shop grinding tungsten carbide with a resin-bonded diamond wheel asked the Grinding Doc about the difference between two conditioning sticks purchased from two differrent suppliers. With one stick the shop can do a lot more parts between stickings. Why is this? Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, responds in the 20th episode of the video series.

Even with a rigid setup, the high cutting forces from driving chips into the T-land face generate small vibrations, which can be seen with Federal-Mogul Corp.'s high-speed video system.

Is minimum quantity lubrication the wave of the future or simply another option shops should keep in mind? Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, responds in the 19th episode of the video series.