Fabrication & Cutting

Add tool life and productivity advantages to facemilling and unrepeated shoulder milling for automotive manufacturing.

Waterjet cutting works as simply as it is effective: the cutting head directs a fine jet of water at high pressure of up to 6,000 bar, a jet diameter of 0.38 to 1.02 millimeters. In this stress-free cutting process, the material particles close to the surface are cut off without any heat being introduced into the material.

The 150 watt laser expands the available CO2 laser source options for the ULTRA X6000 from 10 to 75 watts to 10 to 150 watts. A maximum of 300 watts of 10.6 µm CO2 laser power can be achieved when the ULTRA X6000 is configured with two 150 watt 10.6 µm CO2 lasers.

Energy-efficient dryer and centrifugal cleaning system from Rösler provide mass finishing in an efficient, sustainable manner

Today's MAX System introduces the latest innovation known as Focused Deburring. These multi-axis machines feature up to four 1- to 5-axis heads or towers, which can process simultaneously or in sequence within a single working environment. This ability allows the machines to perform multiple operations on many edges and surfaces of a part at the same time.

Products and tools help perfect engine finishing for the automotive industry.

ALUMA-CLING RED reduces the number of steps to obtain a clean, bright surface. Easy to use, this proven formulation can help manufacturers and fabricators to clean and use aluminum that might otherwise be scrapped due to staining issues.

This machine is built on the success of the Rollomatic LaserSmart® series of machines and particularly addresses the profile cutting and ablation of diamond tooling in the larger diameter range as well as tools with a Monoblock adaptor. The ideal and typical application fields for this machine are the woodworking, automotive and aerospace industries.

A significant increase in marking speed and marking quality on previously insufficiently markable materials are the main benefits of FOBA's green laser. Affected materials include special plastics like UHMWPE, HDPE or PMMA for which additives might no longer be necessary, as well as glass or shiny substrates.

Safe for use on ferrous alloys when used as directed, ULTRA-CLEAN US-159 may etch or stain aluminum and zinc alloys, therefore pretesting before use is recommended. Dilutions from 2-10% by volume in water that is 120-160° are typically effective. Heavier soils and/or ultrasonic applications may benefit from operating at higher temperatures up to 190°F.

The laser profilers project a laser line on the gear at a specific angle, collecting data to generate the entire Z-X profile through an image sensor placed behind the optical receiver.

Lasers offer major steel-cutting advantages, but there are also reasons to pass.