Fabrication & Cutting

The diamond coating portfolio covers the entire spectrum of demanding machining applications and is divided into two groups of different base materials. The first contains coatings for machining highly abrasive compacted and sintered powders like graphite for moulds and dies, as well as ceramics for dental applications.

BioCorr HP is a new generation of BioCorr, Cortec's time-tested water-based and biobased rust preventative containing 54% USDA certified biobased content. It is designed to preserve metals in storage and during transportation. This ready to use product has excellent emulsion stability, contains no chemicals that interfere with automatic transmission fluids, provides multi-metal protection, and is an excellent environmentally sound alternative to petroleum-derived products due to its biobased content.

Global trends toward reducing carbon footprint and operational costs as well as the push for high-precision processing tools have led to increasing demand for compact laser systems that can be implemented in processing plants and production lines.

The Cell-U-Clean Cell Jet is a wash and blow-off machine in a small footprint of 5 ft. wide x 8 ft. long x 9 ft. tall. The work envelope is 36" Diameter x 24" High and comes with a variable speed table drive.

Video highlights the IMCO Streakers M2 Series, which includes the M223 second generation Streaker end mill for machining aluminum alloys and the M233 roughers that plow through aluminum alloys while using 20% less power.

Models in this industry-leading sump cleaner line include the 120 volt electric units which are the most powerful on the market with suction rates up to 85 GPM, as well as air venturi models which use the most efficient powerhead for best suction performance with the least amount of feed air.

First Three-Laser-Diode Engraving Laser Head — The newest addition to our family of industrial cutting and engraving laser heads is arguably the most versatile engraving laser on the CNC market. Boasting a real 15 W of optical power as well as a novel design, this is the first compact CNC laser head that not only marks metal, but deep-engraves it.

The geometry is available as a standard tool for the 224, 229, S34T, 315, and 64T systems for precision machining of external grooves. For internal machining, it is available for the 105, 108, 111, 114, and 216 systems.

The Weifuautocam Precision Machinery Corporation from Wuxi, China is using a Grindstar profile and cut-off machine from Junker for the production of adjusting screws for high-pressure hydraulic pumps. Weifuautocam, a part of the Weifu Group, began collaborating with Junker in 2000.

The Mini Jet a member of our Cell-U-Clean line of parts washers, is an excellent cabinet washer for both small and large parts up to 500 Lbs. where floor space comes at a premium. This spray washer was designed as a high-capacity solution with low energy as an alternative to our heavy-duty cabinet washer product line.

The closed-loop linear slide uses an optical position sensor with sub nanometer resolution and a voice coil linear motor to allow vertical (or horizontal) travel up to 7mm with a velocity up to 200mm/sec (8"/sec) for fast accurate scanning.

Deburring and finishing are still predominantly manual processes for many manufacturers and job shops. However, the results can be inefficient and inconsistent. Automating these processes can solve these problems.