Cutting Tools & Tooling

Sandvik Coromant has appointed two new members to its management group. Michael Eneberg began his new role as Vice President and Head of Global Sales on May 1, 2022, while Nicolas Dellachiesa will join as Head of Merger & Acquisitions (M&A) in June.

General-purpose endmills often fit the bill at high-mix, low-volume shops.

Using Remote Access, rather than waiting hours or days for a technician to arrive on site and diagnose problems that must be fixed, authorized users and third-party vendors can monitor machines remotely and access that data in a fraction of the time, enabling them to quickly respond with a technician or spare parts. Should a problem arise, machiNetCloud automatically alerts third-party technicians and internal users by email and SMS, helping reduce downtime and save on maintenance costs.

For proper material preparation The KBC Pneumatic Hand Chamfering Tool allows you to remove burrs easily and quickly to create a uniform edge with repeatable accuracy up to almost 1mm depth, prepare metal for welding jobs and clean them up after, and a host of other needs in the machine shop or on site. The bearing runs along the edge of the surface while two carbide inserts chamfer the edge for smooth results. (Replacement standard triangular tip carbide inserts, TCMT-09T3, are available.)

Squich HNM (High Number of Mating) inserts are designed to maximize ease of use while minimizing maintenance downtime. These rectangular inserts feature special contacts with galvanic high-performance gold plating and lubrication, which allow up to 10,000 mechanical mating cycles when installed in compatible HNM enclosures. In addition, the Squich spring clamp technology with actuator buttons provides not only fast & reliable wiring but also high resistance to vibration from industrial applications.

KCK20B and KCKP10 are suitable for wet or dry cuts. These include rotor hubs used in windmills, pump housings, steering knuckles and gear housings for heavy equipment, and automotive components like crankshafts and cylinder heads. While KCK20B delivers higher productivity in roughing and semi-finishing operations, KCKP10 is applicable for finishing operations, but also works exceptionally well when profiling and copy milling cast iron and steels up to 45HRC.

The special profile of EMUGE SELF-LOCK threads allows an even distribution of stress over the entire thread length, eliminating slippage. Compared with standard threads, EMUGE SELF-LOCK internal threads show constant, maximum holding power under dynamic stress. Functions remain in good operation even with repeated loosening and re-tightening of the thread connection. The locking effect is caused by the ramp-shaped surface integrated into the thread profile,

Rigibore's "ActiveEdge" adjusts automatically from your measurement data, ensuring perfect bores with zero downtime. ActiveEdge tools are micron accurate in diameter (0.078 thou) so even the tightest of tolerances can be met effortlessly. Save money by increasing production and eliminating scrap, with ActiveEdge technology.

Turning threads on hardened parts can be a challenge when using coated cemented carbide inserts: the cutting edge rapidly wears out before finishing the entire thread profiles, inhibiting greater feed rates and D.O.Cs. to be applied for increased productivity. Of all Tungaloy CBN grades, BX330 provides the cutting edge with the most balanced combination of wear and fracture resistance, making the grade suitable for withstanding continuous and heavy cutting loads inherent in the thread turning method for hardened parts.

These indexable turning inserts are designed for applications where a soft cut and high precision is required. Long tool life is achieved through the WEP10C coated cermet grade with multilayer PVD TiCN TiAlN coating and extra fine cermet substrate grain. Walter's combination of edge preparation and grade also ensures dimensional stability. Primary applications include energy, automotive, and general metalworking.

This comprehensive portfolio encompasses the full breadth of off-hand products used in this market — so there is a productivity-enhancing solution for every job. Tiger cup wheels are available with multiple grain technologies: Tiger Zirc for fast and consistent metal removal; Tiger SiC for controlled cut-rate on sand castings with burnt-in sand; and Tiger AO for consistent performance on cast iron.

hi-feed milling performance for machining of miniature components and smaller part features. NanoFeed is a 20° hi-feed indexable insert design that will replace smaller diameter solid carbide end mills in many applications and offer great economy! Inserts have been designed with pressed-in coolant channels, directing coolant or air directly to the cutting edge for maximizing tool life! Inserts also have backdraft side clearance for straight-wall milling capability.