Machine Tools – Metalcutting

The series includes the VT 1400M, VT 2000M, VT 2500M, VT 3000M, VT 5000 and VT 6000 with table sizes from 1,400 (55") to 6,000mm (236) with maximum turning diameter from 1,600mm (63") up to 7,000mm (276") and maximum height allowed from 1,650 (65") to 4,000mm (157").

The CoroMill MH20 complements existing products in the CoroMill range, and fills a strategic gap in the high feed indexable milling product line. Designed to deliver reliability with minimal vibration, the CoroMill MH20 has been adapted for applications where components are notoriously difficult to machine, such as in the oil and gas, mold and die and aerospace sectors.

DX8, DX6 and DX4 vises were designed using Finite Element Analysis—providing 30% less horizontal push-back deflection than previous DX models. Less vise-body deflection translates to more stability and a lifetime of dimensional precision—setting a new standard in precision flatness, parallelism and repeatability. The DX8 CrossOver® vise features the same bed height and keyway to the stationary jaw face as the D810. The DX8 also features a redesigned nut with less weight, a new brush seal design, and a larger stronger bearing pack for more durability.

This machining center series can be flexibly configured to completely machine larger-sized structural parts which require maximum surface quality and dimensional accuracy, as well as high production rates and minimal downtime. Users will benefit from the machine's compact layout, available robot or gantry automation, and fully independent Z and X-direction spindles

The Mikron MILL E 500 U's powerful 20,000-rpm Step-Tec spindle tackles both rough milling and drilling operations and increases metal removal rates by 20 percent over previous models. Its rigid, stable C-frame cast iron construction reduces vibrations for increased precision and repeatability, while large guideways, a double side-supported rotary table and optimized chip evacuation enhance reliability and part quality. Designed specifically for the additive manufacturing process, the CUT AM 500 horizontal wire EDM makes it easier than ever to quickly separate additively manufactured metal parts from build plates while maintaining geometrical accuracy and ensuring assembly readiness.

The gear head machine a highly precise, powerful and versatile option. It is ideal for milling, drilling, slotting, engraving, boring, tapping and angle machining operations. The all-gear drive transmission delivers full power at any speed. A high-performance brushless DC motor with permanent current control is standard.

Featuring a patented process developed by Starrett called bi-metal unique technology, that provides 170% more weld contact with the teeth, Intenss blades exhibit superior resistance to tooth strippage, significantly reducing fracture and breakage, which enables exceptionally long blade life. Performance is further enhanced by M-42 teeth with a multi-edge tooth design that produces split chips for faster cutting.

The machine places 128 spindles precisely and very close to center. A unique gearless drive is key to making it happen, not only getting each spindle as close as possible, but ensuring rigid performance to avoid backlash. The result is high-quality threads with no lag or out of tolerance thread forms due to gear train play that can occur using a geared head.

The 18-Inch Gear Head Bench Drill Press all-gear head driven transmission delivers full power at any speed, driving the cutting tools at nearly 100% of the available horsepower. To ensure positive, quiet operation, the bench drill uses combined steel and reinforced fibers. The ground steel clutches enhance its performance and strength.

Far surpassing the industry standard of 1%, the BigRep SHIELD maintains 0.1% humidity by looping air through a controlled desiccant chamber without the use of heat, therefore avoiding the risk of over-drying filaments from long-term heat exposure. As part of an industrial workflow, the BigRep SHIELD reduces misprints and material waste by 20% and saves up to 50% on repair costs caused by clogging and extruder damage.

The core of the machine is the 40° inclined bed. Designed as an extremely rigid and compact welded steel construction, it is the basis for a robust and precise lathe. Reinforcements provide additional rigidity in zones exposed to higher stress. As a further development of the MAXXTURN 65 G1, the machine impresses with its modern and innovative design. The optimised integration of the chip conveyor ensures compact dimensions. Instead of belt drives, spindle motors are used on the main and counter spindles, which ensures a particularly wide speed range of up to 5000 rpm and extremely good concentricity properties.

An in-house Tormach professional will install, align, and test all pre-installed components (if partial assembly is chosen) and major systems to the machines for full assembly. This allows customers to speed up the time to commission their new machines quickly at their shop once they arrive.