Products

Products • February 29, 2016

SHEARDRILL solid-carbide drill

Morse Cutting Tools offers the SHEARDRILL solid-carbide drill. With a 140° performance point, the drill machines steel, alloy steel, stainless steel, cast iron and other materials, according to the company. The drill is available in through-coolant (3 and 5 diameters deep) and non-through-coolant (3 diameters deep) versions.

Products • February 29, 2016

PCD05- and PCD20-grade PCD-tipped milling inserts

Seco Tools LLC offers PCD05- and PCD20-grade PCD-tipped milling inserts for its Turbo 10 cutter bodies. The inserts are suitable for cutting aluminum, titanium, polymers and fiber-reinforced composites. When used with carbide inserts, the PCD-tipped inserts act as wiper inserts in fixed pockets. The two grades come in the company's X010 insert size with a corner radius of 0.016" (0.4mm) and a wiper length of 0.43" (1.08mm).

Products • February 29, 2016

FMT beveling tools

FMT beveling tools from Fastenal Co. are for cutting inside and outside bevels, pipe beveling, countersinking and generating radius paint edges. The spark-free, heat-free tools enable users to make head changes in 30 seconds. The electric FMT Bevel Mate is capable of bevel depths up to ½" (12.7mm), and the pneumatic FMT Bevel Mite is capable of bevel depths up to ¼" (6.4mm).

Products • February 29, 2016

Heli IQ Mill inserts

Iscar Metals Inc. offers Heli IQ Mill inserts for numerous milling applications across a variety of industrial sectors. The three helical cutting edges reduce cutting forces and power consumption, according to the company. The inserts are now available in cermet for machining medium to hard materials, are peripherally ground for milling stainless steel, and are ground sharp and diamond-polished for cutting aluminum.

Products • February 29, 2016

Mikron microtools

Mikron Corp. Monroe provides cutting tools from 0.004" (0.1mm) to 0.25" (6.0mm) in diameter for machining stainless steel, titanium, chrome-cobalt and high-temperature alloys. These include the CrazyDrill Twicenter with through-coolant ducts for centering, the CrazyMill Cool through-coolant milling cutter, the CrazyMill Chamfer deburring tools and the CrazyDrill Inox drill, which is available with or without through-coolant. The tools impart fine surface finishes, making secondary operations unnecessary, according to the company.

Products • February 29, 2016

Aqua Drill EX Flat series

Nachi America Inc. says its Aqua Drill EX Flat series provides one-step drilling. The drill eliminates the need for a center drill or endmill on inclined or curved surfaces. The 180° flat cutting edge creates a minimal exit burr. The tools feature the Aqua EX coating for enhanced heat and wear resistance. New fractional sizes will be available in May.

Products • February 29, 2016

ADDER universal endmills

Cobra Carbide Inc.'s ADDER universal endmills have a 40° helix and a variable-flute geometry. According to the company, the endmills enable chatter-free milling in hard, ferrous materials and impart fine surface finishes. The coatings reportedly allow users to dramatically increase feeds and speeds, take deeper DOCs and extend tool life.

Products • February 29, 2016

Air-operated lift-magnet system

Eriez' air-operated lift-magnet system moves multiple parts or cutouts up and off of burn tables. It also can lift single sheets or plates up to 3" (76.2mm) thick from a stack to load a table. The system improves productivity and safety by eliminating manual handling of multiple parts and the need for operators to climb on burn tables, according to the company. Standard models have 24" (609.6mm), 48" (1,219.2mm) and 120" (3,048mm) designs to accommodate most common plate and sheet sizes.

Products • February 29, 2016

GC4305-grade insert

Sandvik Coromant Co. says the GC4305-grade insert maximizes metal-removal rates, shortens processing times and enhances component quality when turning steel. It is made of a heat-resistant cutting material that is suitable for dry machining, which is ideal for automotive part manufacturers that seek to avoid the stresses tools experience as a result of temperature fluctuations. The insert features the company's wear-resistant Inveio coating.

Products • February 29, 2016

WP chipbreaker

Kyocera Precision Tools Inc. says positive-style inserts with its WP chipbreaker and a wiper cutting edge impart fine surface finishes at low cutting forces. The chipbreaker stabilizes chip conditions at low feed rates, controls excess chip breaking during high-feed and high-load machining and prevents tearing of the finished surface by controlling adhesion. The inserts are for machining steel and stainless steel and are available in a variety of CVD- and PVD-coated grades.

Products • February 29, 2016

HGW series tools

G.W. Schultz Tool Inc.'s HGW series tools are available with four, five or seven flutes and are for machining high-temperature alloys, tool steel and most stainless steel alloys. Designed for high-efficiency machining, the nACo-coated tools are suitable for full slotting, climb milling and dry cutting with a high feed. According to the company, customers increased tool life 10 to 30 percent while spending 5 to 30 percent less money.

Products • February 29, 2016

SwiftCARB Corner Rounders

SwiftCARB offers a complete line of straight-shank and shell-mill indexable-insert corner rounders. According to the company, the tools increase cutting speeds and feed rates by 25 percent, and the tools' inserts can be changed quickly, which enhances efficiency. The company stocks more than 70 radii, from 0.010" to 1" and from 1mm to 25mm.