Videos

Videos • July 5, 2013

Cylindrical Match Grinding Webinar

Join United Grinding Technologies for an in-depth look at cylindrical match grinding in an on-demand Webinar that addresses the need for match grinding, the principles behind match grinding, as well as the advantages and disadvantages of the process.

Videos • July 5, 2013

Broach approach

Tim Espy, plant manager at V W Broaching Service Inc., Chicago, provides the play-by-play as an internal spline is created on a 24" dia. ball valve for a water utility. The broaching shop uses a Colonial horizontal broaching machine to produce the spline in the stainless steel valve in just a few seconds.

Videos • July 5, 2013

Spindle safety

Jakob Antriebstechnik, a spindle manufacturer in Germany, recently demonstrates its Motor Spindle Safety System, which is said to prevent major damage when spindle collisions occur.

Videos • July 5, 2013

Hyperspecialization age

In it's second Looking Ahead video, Sandvik Coromant gathered industry experts to talk about talent mismatch, employment outsourcing and the age of hyper-specialization.

Videos • July 5, 2013

Appearances can be deceiving

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, addresses how appearances can be deceiving for shops engaging in traverse disc grinding in the 42nd episode of the video series.

Videos • June 5, 2013

Slot milling demo

An Iscar ¼ " solid-carbide FINISHED endmill reduced cycle time from more than 6.5 hours to 8 minutes when slotting an A-36 steel oil pan at SFI.

Videos • June 5, 2013

Pricey diamond

Are diamonds a machine shop's best friend? Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, takes a close look at the question in the 41st episode of the video series.

Videos • May 5, 2013

Ultrasonic clean

Blue Wave Ultrasonics Sales Director Jeff Hancock demonstrates the ultrasonic cleaning process and explains the relationship between ultrasonic pressure waves and microscopic cavitation bubbles working in an aqueous solution. Blue Wave, which is located in Davenport, Iowa, provided the video as a video supplement to "Clean Sounds," a feature article published in the May 2013 issue of Cutting Tool Engineering magazine.

Videos • May 5, 2013

Don’t get cracking

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, helps a shop that's getting cracking at the corner radius of a tungsten-carbide part in the 40th episode of the video series.

Videos • April 9, 2013

Kennametal quick-change

Kennametal shows a side-by-side comparison of its KM-Micro/Mini quick-change system versus a standard tool in this 2-minute demonstration, courtesy of Kennametal. While the KM-Micro/Mini tool change is complete in just half a minute, the standard tool requires 2 minutes to change, set up and gage the tool.

Videos • April 5, 2013

Tool quickie

In this 2-minute side-by-side comparison, Kennametal shows its KM-Micro/Mini tool being changed in just half a minute versus a standard tool requiring 2 minutes to change, set up and gage.

Videos • April 5, 2013

Grinding the wave

A shop experiencing on-again, off-again waviness issues during cylindrical OD grinding operations asks Dr. Jeffrey Badger why the problem comes and goes in the 39th episode of Cutting Tool Engineering magazine's Grinding Doc Video Series. Badger, the host of video series, provides some insight.