Chucks

CC E-Motion Electric Chuck

Ideal for everyday use, the CC e-motion offers unbeatable accuracy and flexibility for high or low volume turning, inspection and finishing operations while providing fast, seamless machine integration. Optimum for either heavy duty or precision machining of any workpiece geometry, the chuck allows users to not only program the cutting cycle, but the jaw movement and gripping cycle as well.

3+3 Air Chuck

Ideal to handle the harsh demands of the Oil and Gas industry, BB-FZA2G allows for quick and easy setup of odd shaped pipe for threading and re-threading. Thanks to incorporating three jaws with axial adjustment of the centering position while also using three compensating jaws with extra long rapid and clamping stroke of 1.5”, there is no need to re-shim the part. This enhances operator safety and greatly increases overall productivity.

COMOT-AZ Quick Change Collet Chuck

Change from a Collet Chuck to Mandrel in Seconds with Hybrid COMOT-AZ

Effectively used for hard turning, gear grinding, drilling, milling and more, COMOT-AZ provides low deformation clamping of thin-walled workpieces and offers a large selection of standard collets available in round, square, hexagonal, and special configurations when needed for virtually all sizes of spindles.

Ultra-Precision Balance Chucks

When parts rotate without calibration, increased or insufficient pressure occurs, causing errors with the end-product. In a high precision environment, even the smallest difference can have a huge impact on the final product. When the fine tolerances have been exceeded, the result can be expensive and time-consuming repairs.

ROTA-M Flex 2+2

The SCHUNK ROTA-M flex 2+2 clamping is done in a self-locking manner, and the clamping condition is signaled via indicating pins. The standard chuck sizes 260 to 1200 achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. As of size 800, users benefit from the weight-reduced design. The chuck face is equipped with grooves, and fixed stops allow the chuck to also be used as a vise. Moreover, the large sizes are designed for use on vertical lathes.

22c CNC Collet Chucks

CNC collet chucks and collets are an alternative to pneumatic or hydraulic workholding devices and are well-suited for high production runs. Standard shapes such as round, square and hexes can be held accurately and quickly compared to a three or four jaw chuck.

Brass Pie Jaws

Dillon full-grip chuck jaws are made in the USA with industry-leading lead-times. They are ideal for high-speed machining, as well as precision boring, tapping, drilling, and finishing across virtually all industrial markets. In addition to brass, Dillon Full Grip Pie Jaws are available in 6061 aluminum, 1018 steel and cast iron.

ROTA THW3 Chuck

ROTA THW3 Lathe Chuck With Quick Change Jaws

The ROTA THW3 chuck with quick-change jaws has been completely redesigned to fit into today’s modern machine tool technology. Today’s machines allow multiple features for today’s manufacturing. For example, quick change tooling, large tool storage, multi spindles, and modular machine controls, to name a few. This technology creates a better experience for the customer by allowing for faster throughput, flexibility, and accuracy. The standard chuck that typically come with these machines are not up to the task with today’s machine tool technologies and part demands. Available in stock from size 200-630mm.

Standard Type, F Type, R Type Chucks

Hydraulic Chuck Line for Swiss Lathes Expanded

To minimize machine downtime and provide operator safety, these Hydraulic Chucks use a simple hex wrench that requires only two to three turns for both clamping and unclamping. Tightening is complete when the clamping screw hits the bottom; controlling tightening torque is not needed. Once a Hydraulic Chuck is centered, the runout will not vary, even if a cutting tool is changed repeatedly. Runout of fewer than three microns at four times diameter can be achieved.

BP Chuck

Proofline® Sealed Chuck with Open-Center Delivers Maximum Precision and Durability

Ideal for CNC lathe applications, BP’s large through hole provides tremendous flexibility for virtually any application where a standard chuck is used including: O.D. and I.D. clamping, bar stock clamping and shaft clamping. Easily convert BP to a collet chuck using collet pads for small diameter parts.