Industry News

10/30/2018
Technical tip: Maximizing waterjet orifice life
As with any industrial equipment, there are certain components of waterjet cutting systems that are expended during operation. These consumables will need regular replacement to keep the machine running efficiently. In an abrasive waterjet, garnet will account for the bulk of consumable expenditure. However, both abrasive and water-only machines contain parts in the pump and cutting head that are constantly exposed to extreme conditions, causing them to eventually wear out. One such part is the waterjet orifice, a small metal disk containing a gem that focuses the waterjet stream.
10/30/2018
Digital technology drives excellent customer experience
The challenge racing across businesses today is how to improve, scale and sustain an excellent customer experience (CX). CX is the sum of all the customer’s interactions, good, bad or indifferent, with a company’s products, services and other support services that the customer encounters in their pre-, during and post-purchase activities.
10/26/2018
Oregon Manufacturing Innovation Center Research and Development
Scappoose, Oregon; September 21, 2018 – The Oregon Manufacturing Innovation Center Research and Development (OMIC R&D) continues to grow its company membership with the recent addition of IMS Software, based out of Haverhill, Massachusetts.
10/26/2018
Oregon Manufacturing Innovation Center Research and Development
Scappoose, Oregon; September 20, 2018 – The Oregon Manufacturing Innovation Center Research and Development (OMIC R&D) continues to grow its company membership with the recent addition of global cutting tools manufacturer Seco Tools, LLC.
10/26/2018
Chandra Brown
CHICAGO (Sept. 19, 2018) – The Digital Manufacturing and Design Innovation Institute (DMDII) announced today that former federal executive and startup trailblazer Chandra Brown has been named executive director effective Sept. 26, 2018.
10/26/2018
Saint-Gobain Abrasives Inc.
WORCESTER, MA, USA (September 6, 2018) – Saint-Gobain Abrasives, one of the world’s largest abrasives manufacturers, announced the introduction of its new division, Performance Grinding Solutions (PGS).
10/26/2018
Rachel Ciullo, owner and president of toolmaker Composite Cutter Technology Inc. in Volo, Illinois
CTE Managing Editor Greg Bartlett spoke with Rachel Ciullo, owner and president of toolmaker Composite Cutter Technology Inc., Volo, Illinois, about her business and life. The company manufactures PCD cutting tools, PCD wear parts and precision-machined parts for customers in automotive, aerospace, electronics, optical and other industries.
10/26/2018
Kip Hanson reflects on the frustrations of dealing with spammers.
It started with the email from “Sarah.” “Dear Friend. We are precision CNC machining manufacturer from China. Please try us, so that you will cost-down 40 percent at least!” I hate junk mail. Next to robocallers and those dirtbags who leave ominous voicemails threatening legal action by the IRS, spammers are the worst. The intrusiveness of it, the endless inbox management, never mind the laughable English skills. It’s irritating.
10/26/2018
GETTY IMAGES/WILLIAM VANDIVERT
The .45-caliber pistol, aka the M1911A1, is one of the most iconic handguns ever made. Perhaps the rarest of this common breed are those made by Singer Manufacturing Co. Best known for manufacturing sewing machines, Singer produced a handful of .45s on the eve of World War II. The guns were so good that the U.S. military asked the company to build more complicated equipment instead.
10/25/2018
Automation abounds at The Assembly Show
While attending The Assembly Show, it seems that I saw robots and other automation equipment everywhere I turned. The trade show and conference took place Oct. 23-25 at the Donald E. Stephens Convention Center in Rosemont, Illinois.
10/25/2018
Scholarship created for students in manufacturing-related programs
CNCMachines.net, an American used CNC machine dealer based in Sanford, Florida, announced it is accepting applications for a newly created $2,000 scholarship. The competitive award is for students enrolled in a CNC machinist, CNC operations, engineering or manufacturing certificate or degree program.
10/24/2018
Oqton Inc.
August 21, 2018 10:00 AM Eastern Daylight Time. SAN FRANCISCO--(BUSINESS WIRE)--Oqton, an autonomous manufacturing platform provider, today announced the appointment of Carl Bass to its board of directors.
10/24/2018
LNS Group
September 10, 2018 Cincinnati, Ohio – The LNS Group has acquired Meadville, Pennsylvania-based ChipBLASTER, Inc. the maker of high pressure coolant systems, coolant chillers, cyclonic filtration systems and other machine tool peripherals.
10/24/2018
Vimana
Berkeley, CA – September 10, 2018 - VIMANA has been selected by Sandvik Coromant as the manufacturing analytics platform for their newly announced CoroPlus® MachiningInsights offering.
10/24/2018
Mike Sullivan
NILES, Ill. – September 2018 – CGW-Camel Grinding Wheels announces Mike Sullivan as president for CGW and PASCO in the U.S. and Canada.
10/24/2018
Credit: Peter Lindblad
For a long time, not much was known about Savannah Co. The precision machining firm didn’t even have a sign out front. There is one now. Arne King, who purchased Savannah two years ago, is working to enhance its visibility.
10/23/2018
Niigata Machine Techno USA Inc.
Sudbury, MA, U.S.A. (September 5, 2018) – Methods Machine Tools, Inc., a North American supplier of precision machine tools and automation, has announced it has entered into an agreement to represent Niigata Machine Techno USA, Inc. throughout the U.S., Canada and Mexico.
10/23/2018
BobCAD-CAM Inc.
Clearwater, FL -- (www.bobcad.com) -- To our valued customers, partners and resellers: We here at BobCAD are very excited to announce that BobCAD-CAM software and Proaktif Technology have aligned for a new partnership, providing quality BobCAD-CAM CNC software & training solutions in the Western Hemisphere.
10/23/2018
Sam Richards
In response to the growth of its Edgecam, Surfcam and WorkNC metal-cutting brands, Vero Software has hired new Northeast Account Manager Sam Richards to support customers of the three brands in the region.
10/23/2018
WB Industries
ST. LOUIS (August 29, 2018) – WB Industries, a custom metal and structural fabrication, welding, and precision machining company, announces the addition of Joseph Behlmann as its director of operations and Richard Wages as its newest project manager.