Industry News

Running a small to medium-sized machine shop business presents many challenges. Alliance Broach & Tool, East China, Mich., has been in the business of building its operations and client base for more than 35 years; the company knows about some of these challenges. In spite of a tough economic climate, however, Alliance continues to significantly grow. After nearly 40 years, that is an impressive accomplishment.

President Trump has signed an executive order that formally ends U.S. participation in the Trans-Pacific Partnership, the 12-nation trade agreement negotiated by former President Obama but never ratified by the U.S. Congress.

Chicago-based Digital Manufacturing and Design Institute has opened enrollment for the first three of a planned 10 online "101"-style courses on manufacturing and design technology. Developed in partnership with the University at Buffalo and coordinated by The Center for Industrial Effectiveness for the Coursera online learning platform, Digital Manufacturing and Design Technology launches on Jan. 30.

Researchers at Missouri University of Science and Technology are helping manufacturers eliminate flaws introduced during the machining of large, costly components. In the February 2017 issue of the Journal of Manufacturing Science and Engineering, the Missouri S&T researchers describe their approach and explain how it can improve the accuracy of the 5-axis machine tools used to make large parts.

GM has announced that it will invest an additional $1 billion in U.S. manufacturing operations, creating a total of 7,000 new jobs here. Is it a case of "If I tweet them, they will come?" After the announcement, incoming US President Donald Trump was quick to tweet about "all of the jobs I am bringing back into the US." Not so fast, say GM and industry watchers.

U.S. manufacturers spent $168.69 million on cutting tools in November 2016, according to the Cutting Tool Market Report by the U.S. Cutting Tool Institute and AMT – The Association For Manufacturing Technology. This was 0.2 percent lower than October’s $168.99 million, but was up 9.3 percent from November 2015's $154.28 million.

Hassay Savage, which manufactures and supplies micro cutting tools such as broaches, round tools, reamers and drills, was searching for a new method of qualifying its micro cutting tools when company owner Robert Savage watched a demonstration of the Zoller Inc. »pomBasicMicro« at an American Gear Manufacturers Association event. Soon after, Savage purchased the »pomBasicMicro« as the solution he was seeking.

With potential ramifications for 3D printing of metals, particularly of expensive metals such as titanium, The U.S. Dept. of Energy's Ames Laboratory has created a process for making "perfect" metal powder. Each particle is smooth and spherical, allowing it to flow without clumping and pack together more densely.

suitX, a California-based robotics company designing and manufacturing medical and industrial exoskeletons, recently announced the official launch of MAX, a flexible exoskeleton that can be adapted to a variety of workplace tasks. MAX comprises three exoskeleton modules: backX, shoulderX and legX.

Robot use is set to accelerate: Worldwide spending on robotics and related services will more than double by 2020, growing from $91.5 billion in 2016 to more than $188 billion in 2020, according to the newly updated Worldwide Commercial Robotics Spending Guide from International Data Corporation (IDC).

The Occupational Safety and Health Administration (OSHA) has issued a final rule to prevent chronic beryllium disease and lung cancer in U.S. workers by limiting their exposure to beryllium and beryllium compounds. The rule contains standards for general industry, construction and shipyards.

Economic activity in the manufacturing sector expanded in December, and the overall economy grew for the 91st consecutive month, say the nation’s supply executives in the latest Manufacturing ISM Report On Business.

While rumblings of a jobless economy may be increasing, the biggest problem facing the U.S. jobs market is a lack of applicants—skilled or otherwise, according to a Bloomberg Businessweek report.

While U.S. workers are still losing jobs to outsourcing, a report by Ball State University finds that 87 percent of American manufacturing job losses over the last 16 years are due to productivity gains, including better supply chains, more capital investment and advancing technology.

It’s hard for Babatunde Ogunnaike to contain his excitement at the thought of a new federal grants program aimed at improving the U.S. manufacturing workforce. Last week, President Barack Obama signed the 2017 National Defense Authorization Act (NDAA), a bill setting policy for all activities at the Department of Defense (DOD). Buried within the 969 pages of legislation (S. 2943) is a manufacturing engineering education program to be run by the Office of the Secretary of Defense. Ogunnaike, dean of engineering at the University of Delaware (UD) in Newark, has been an advocate for the program ever since two Washington, D.C.–based think tanks first floated it 4 years ago as a network of manufacturing universities.

A $650,000 grant awarded last year to TCAT Elizabethton has enabled the school to begin a new program, machine tool technology. The first class will begin Jan. 4.

It’s been a crusade for many manufacturers for years: the battle against an out-of-date public perception of manufacturing as dirty, repetitive work that’s possibly unsafe and probably a dead-end career path. Two recent surveys show that there’s still a lot of work to do in dispelling that myth—but a third offers some hope.

The world of robotics and automation is changing fast. International Data Corp's (IDC) Manufacturing Insights Worldwide Commercial Robotics program peeks over the horizon with predictions for the world of robotics in 2017 and after.

A Boston Consulting Group survey finds that US companies consider digital technologies a priority, but that many manufacturers feel no urgency and have no strategy to implement them. For example, nearly 90% of manufacturing leaders regard adopting new digital industrial technologies as a way to improve productivity, but only about one in four see opportunities to use these advances to build new revenue streams.

While manufacturing technology sales were down in October compared to September (and the high order volume that came along with IMTS), the latest U.S Manufacturing Technology Report from AMT - The Association For Manufacturing Technology shows October sales were 0.2 percent higher than October 2015.