NIST: Fortify Manufacturing, Save $100 Billion, by Closing Tech Gaps

Published
November 23, 2016 - 02:45am
NIST engineer Jeremy Marvel adjusts a robotic arm used to study human-robot interactions.

To spur significant innovation and growth in advanced manufacturing, as well as save over $100 billion annually, U.S. industry must rectify currently unmet needs for measurement science and "proof-of-concept" demonstrations of emerging technologies. This is the overall conclusion reached by economic studies funded by the National Institute of Standards and Technology (NIST) of four advanced manufacturing areas used to create everything from automobile composites to zero-noise headsets.

"Gaps in the technology infrastructure--including the lack of reliable measurement and test methods, scientifically based standards, and other formal knowledge and tools--limit advanced manufacturing's further development and adoption," stated NIST economist Gary Anderson, coordinator of the economic studies prepared by RTI International, an independent nonprofit research institute.

Using data collected through extensive interviews and surveys with researchers, developers, manufacturers and other stakeholders, each of the four studies identifies 5 to 10 critical technical barriers to the adoption of its specific manufacturing technology. The studies also estimate the impacts of eliminating those obstacles and define which needs should be met first to do so.

For example, establishing industry-wide standards and measurements for the inks and substrates used in roll-to-roll (R2R) manufacturing--the fabrication of electronic devices on a roll of flexible plastic or metal--is projected to reduce production costs by 15 percent. Likewise, the development and adoption of verified reference data, robust measurement technologies and testing protocols, and standardized modeling and finishing methods could yield some $4 billion in annual benefits and savings for additive manufacturing, a process also known as 3D printing.

The two largest predicted cost savings were the $57.4 billion and $40.1 billion for the smart manufacturing (where all manufacturing data from design to finished product is electronically exchanged and processed) and advanced robotics and automation sectors, respectively. Among the needs that must be met to realize both of these benefits, the researchers said, is increasing access by small- and medium-sized manufacturers to the same state-of-the-art methods, tools and knowledge as their larger counterparts.

For each of the four advanced manufacturing technologies studied, the estimated annual cost savings and percentage reduction in production costs are:

  • Additive manufacturing: $4.1 billion, 18.3 percent
  • Advanced robotics and automation: $40.1 billion, 5.3 percent
  • Roll-to-roll manufacturing: $400 million, 14.7 percent
  • Smart manufacturing: $57.4 billion, 3.2 percent

The researchers stated that their studies only looked at benefits directly attributable to closing the identified technical gaps in each sector; therefore, the impact estimates are conservative. "If we consider the larger-scale outcomes brought about by meeting these needs--such as new and improved products, increased production quality, long-term industry growth and job creation--the impacts would be significantly higher," Anderson said.

The studies also support a number of key strategies for overcoming technical barriers and fortifying advanced manufacturing, including: keeping standards and performance measures nonproprietary, using public research institutions to develop those tools, and working through manufacturing research consortia and technology extension services to ensure that all manufacturers--especially small- and medium-sized enterprises--can access them.

"Our studies emphasize that full economic impact will only be realized if all technical needs are met, and all stakeholders regardless of size, not just large manufacturers, can share in the rewards," Anderson said.

A summary of the overall findings from the four economic studies is available at http://nvlpubs.nist.gov/nistpubs/eab/NIST.EAB.1.pdf.

The individual reports also may be accessed:

Related Glossary Terms

  • composites

    composites

    Materials composed of different elements, with one element normally embedded in another, held together by a compatible binder.

  • robotics

    robotics

    Discipline involving self-actuating and self-operating devices. Robots frequently imitate human capabilities, including the ability to manipulate physical objects while evaluating and reacting appropriately to various stimuli. See industrial robot; robot.

Author

Former Senior Editor
734-606-9673

Michael Anderson, former senior editor at Cutting Tool Engineering magazine, holds a master's degree in written communication from Eastern Michigan University. He has been professionally writing about manufacturing technology since 1998, including more than 10 years at the Society of Manufacturing Engineers.

INDUSTRY NEWS

11/21/2024
Shipments of cutting tools, according to the Cutting Tool Market Report compiled in a collaboration between AMT - The Association For Manufacturing Technology and the U.S. Cutting Tool Institute (…

11/20/2024
Students in Itawamba Community College’s Precision Machining Technology program have a new toolbox, courtesy of a $20,000 grant by the Gene Haas Foundation.

11/19/2024
Flex Machine Tools, an American manufacturer and provider of machine tool solutions worldwide for metal fabrication operations, will host an Open House Event at Flex headquarters in Wapakoneta, Ohio…