Standardizing on software
Success and tech support lead an Denmark company to deploy Numroto across its entire production floor.
Operation / Process
Fabrication & Cutting
Compact contender
The refrigerator-size Micro5 is designed to machine small and delicate parts.
Supermini
The insert of the Supermini Type 105 system requires only one tool holder for well over 1,000 insert variants. This applies equally to left-hand and right-hand versions. The carbide inserts are available in coated and uncoated versions in different grades for every application including hard machining up to 66 HRC. The patented droplet shape of the cross-section has a vibration-damping effect and delivers excellent repeatability when changing the insert. Internal coolant supply to the insert increases tool life, enhances cutting performance and improves chip removal.
Better boring basics
Get more out of boring tools by focusing on three key areas.
Safety in small numbers
Properly designed and applied tools enable deep-hole microdrilling to be less treacherous.
Combination Belt & Disc Finishing Machine
The combination finishing machine is really two machines in one because it can handle a multitude of jobs that include contour part finishing, flat stock finishing, polishing, grinding and deburring—virtually any finishing operation. The belt arm adjusts vertically, horizontally and any position in-between.
Need a Lift?
A lift magnet for a plasma cutting table has exceeded expectations.
To the Finish Line
Toolmakers offer a variety of products to achieve surface finish specifications, including ones for polishing, buffing and grinding.
F.0100-ir Marking System
The ultrashort pulse laser marks in the deepest, matt and non-reflective black without generating significant heat input on the workpiece. Even through further processing steps, such as passivation, the marking remains reliably legible and corrosion resistant. Due to the very short pulses down to the femtosecond range, in combination with high pulse energies, the system marks various stainless steels, titanium and a variety of plastics.
Light the beam
Laser machining has distinct advantages and disadvantages
The proper formula
A Formula One contractor accelerates quality control.
Get the whole picture
When needing to capture complete measurement data, noncontact 3D laser scanning is available.