Milling

Seco Tools' new Power 4 copy milling cutter has been developed in cooperation with customers in the power generation sector to create an optimized solution for turbine blade production.

Emuge Corp. announced the introduction of TiNox-Cut, a new series of end mills specifically developed to provide exceptional tool life when machining challenging materials.

Machine Technology column for the August 2010 issue of Cutting Tool Engineering.

LMC Workholding introduces new Neidlein FFBHZ face drivers for gear grinding, gear hobbing and gear milling, suited for high runout result operations with zero backlash.

Get with the Program column for the July 2010 issue of Cutting Tool Engineering.

Machine Technology column for the July 2010 issue of Cutting Tool Engineering.

A new concept of calculating the required machining power when milling.

When drilling and milling, controlling runout is critical to maximize tool life and reduce cost per hole.

TDM Systems GmbH's new Version 4.4 tool data management software is available.

MAG adds a new 6,000 rpm/ 46 kW (61.6 hp) tilt spindle to an all-around 10,000 rpm/ 56 kW (75 hp) spindle, high-speed 24,000 rpm spindle, high-torque 2600 Nm (1918 ft lb) spindle and two live spindles (110 or 130mm diameter) as headstock options.

Seco Tools Inc. has added Combimaster heads to its line of Square 6 square shoulder milling cutters.

Machine Technology column for June 2010 Cutting Tool Engineering magazine.