Surface Finishing & Coating

The geometry is available as a standard tool for the 224, 229, S34T, 315, and 64T systems for precision machining of external grooves. For internal machining, it is available for the 105, 108, 111, 114, and 216 systems.

The Mini Jet a member of our Cell-U-Clean line of parts washers, is an excellent cabinet washer for both small and large parts up to 500 Lbs. where floor space comes at a premium. This spray washer was designed as a high-capacity solution with low energy as an alternative to our heavy-duty cabinet washer product line.

Deburring and finishing are still predominantly manual processes for many manufacturers and job shops. However, the results can be inefficient and inconsistent. Automating these processes can solve these problems.

VpCI-330 is clear, ready-to-use, low-viscosity, and designed for protection of metals in indoor and outdoor sheltered conditions. It performs effectively even under the adverse conditions of 100% relative humidity and in the presence of corrosive species such as chlorides. It protected for over 800 hours in humidity chamber testing and received a 1a rating in copper strip testing.

A number of factors should be considered when selecting indexable inserts.

Deburring parts with vibratory finishing equipment is a cost-saving and more consistent alternative to manual deburring.n

D-Greeze-500 LO is non-hazardous and non-HAP offering features and performance which greatly reduce energy and specialized equipment costs. While designed to be a slow evaporator, when quick drying is required it can be instantly blown off using blower generated low pressure high velocity air through an air knife.

The Return to Load, a member of our Cell-U-Clean line of parts washers, is an excellent cabinet return to operator washer for parts up to 40 Lbs. where floor space comes at a premium. This low-cost spray washer was designed as a high-capacity solution with low energy usage.

This three-minute video from Walther Trowal explains and demonstrates the company's vibratory mass finishing technology.

In the past decade, a California-based machine shop has relied on a flexible, honing tool for a range of automated CNC machining applications such as cross hole deburring, cylindrical honing, surface finishing, edge-blending and cleaning.

Two machining applications show the gains that minimum quantity lubrication can provide.

The compact StyliCleaner, which has a 70mm (2.8in) x 100mm (3.9in) footprint, is available in two sizes, StyliCleaner8 and StyliCleaner16, designed to decontaminate styli from 0 to 8mm (0.31in) and from 6mm (0.24in) to 16mm (0.62in) in diameter, respectively.