Product Category

Cutting Tools & Tooling

Optional: narrow results to one content type.
Select one or more.
Select one or more.
Select one or more.
Reset
Products February 9, 2022
M5137 Xtra·tec XT Shoulder Milling Cutter
This milling cutter can be used universally for steel, stainless steels, cast iron and difficult-to-machine materials, in face, shoulder, ramping, pocket, and circular interpolation milling operations. Available in diameters of 32-100 mm, a maximum depth of cut of 5 or 8 mm), with Weldon shank or shell mill mount interface.
Videos February 4, 2022
The next generation grades in steel turning
With the WPP10G, WPP20G and WPP30G grades, Walter presents the new Tiger·tec® Gold indexable inserts, specially designed for turning operations. The multi-layered, highly textured MT-TiCN Tiger·tec® Gold coating increases tool life by an average of 50%.
Products February 2, 2022
DoFeed LNMU0303UER Inserts
The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic materials for longer insert tool life. Also, a small approach angle directs the cutting forces in the axial direction towards the spindle.
Products January 29, 2022
DuoJust-Cut
New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally compressed and curled chips, allowing excellent chip evacuation and superior surface finish.
Products January 29, 2022
High-Temperature Rectangular Connectors
The operational temperature of the Mencom standard metal rectangular connectors is between -40°C and 125°C. However, the Mencom high-temp series enclosures and inserts are designed to withstand a higher range of temperatures up to 180°C (356°F) and cold temperatures down to -40°C (-40°F) when they are installed together. The enclosures are made of die-cast aluminum coated with high-temperature resistant, red-colored thermosetting powder.
Products January 29, 2022
MiniForce-Turn
The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.
Products January 28, 2022
SDMX Indexable Insert
There are two indexable insert sizes with facet—SDMX0904ZDR-E27 and SDMX1205ZDR-E27. The M4002 cutter provides a depth of cut of 1.5 or 2.0 mm and is available in diameters of 25-125 mm or 1-4 in. and is ideal for high-speed milling in steel and cast iron, stainless steel and materials with difficult cutting properties. And for demanding machining in mold and die making and general machining.
Products January 26, 2022
P3 Collet
The anti-friction coating reduces radial distortion helping improve run-out. Parlec P3 ER collets have a repeatably accuracy of 0.0001" and are sealed for coolant pressures up to 2,000 PSI due to a special slotting design. Parlec P3 ER collets are available in ER11, 16, 20, 25, 32 and 40 in inch and metric sizes and are meant to be used with on-size tooling.
Products January 25, 2022
AH3225 Insert Grade
AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased thermal shock resistance and hardness reducing thermal crack generation on the cutting edge. This prevents unpredictable insert failure, significantly extending tool life and reliability for steel machining.
News January 24, 2022
Star SU names regional sales manager
Star SU in Hoffman Estates, Ill., has appointed Mike Kowalsky as a regional sales manager for Wisconsin and Minnesota, responsible for growing the sales of both gear and round cutting tools for the company.
1 … 40 41 42 43 44 … 233

Explore

Address:

121 S. Wilke Rd.
Suite 200
Arlington Heights, IL 60005
Phone:
Email:
Digital magazine delivery:
Author Login | Cookies
© 2026 CTE Publications, Inc. All rights reserved.