Milling Cutters

Products • January 13, 2021

Xtra·tec XT M5012 Face Milling Cutter

The Xtra·tec XT M5012 is highly cost-effective thanks to inserts being offered in a fully ground configuration for maximum precision, or fully sintered configuration for maximum cost efficiency. The bodies are offered in either ScrewFit or shell mount and with two pitches for different applications.

Products • January 8, 2021

Multi-Function Milling Tool (MF)

Designed for applications including spotting and drilling, side milling, chamfering, slotting, grooving, and engraving, the new Carmex Multi-Function Milling Tool (MF) delivers economy and versatility, as well as superior cutting performance. Constructed of ultra-fine carbide grade for stability and wear resistance, the Multi-Function Milling Tool features a new generation of PVD coating for higher performance.

Products • December 22, 2020

M5137 Xtra·tec XT Shoulder Milling Cutter

The M5137 Xtra·tec® XT boasts reduced process costs thanks to its Tiger·tec® coating and six cutting edges per indexable insert. This translates to simple tool selection and low cutting material costs​, and highly cost-effective operation due to low unit costs.

Products • December 10, 2020

PCD Round Tools

Extremely sharp cutting edges and low-friction rake surfaces eliminate concerns over built-up- edge. Low friction machining also produces superior surfaces in finishing operations, such as reaming. Surface roughness of Ra 0,1–0,8 μm (0.0025–0.02 μ-in) is achievable – far superior to conventional carbide tooling.

Products • November 12, 2020

HARVI I TE Ball Nose End Mill

he HARVI I TE ball nose end mill is available in two different lengths, both with a diameter range from 2 to 20 mm (1/16" to 1"). The regular length is the first choice for 3D copy milling operations, while the long version offers sufficient length-of-cut (up to 4sD) for many applications, including shoulder milling when wall and floor finishing is required. n

Products • October 22, 2020

M2471 Milling Cutter

The M2471 milling cutter, ideal for the aerospace and energy industries, boasts a high metal-removal rate even on low-performance machines thanks to its soft cutting geometries and positive cutting characteristics. It brings all the benefits of single-sided round inserts to double-sided round insert cutting. The insert and body are designed so that their overall stability is guaranteed during use of all eight cutting edges.

Products • October 14, 2020

Cutting Tools with Diameters in Fractional Inches

The need for such dimensions is increasing that's why Mikron Tool has introduced a fractional inches diameter range for a large assortment of its drilling and milling cutter families. The selection is focused on materials such as stainless steel, titanium and superalloys. The range includes micro drills and micro mills of .016" and extends up to diameter .250". From the high-performance small Crazy Drill Steel up to the cylindrical micro end mill Crazy Mill Cool, Mikron Tool offers a tool range that will satisfy most every need in a multitude of projects.

Products • October 7, 2020

TungMeister VFM Milling Head

TungMeister is designed to reduce a significant amount of tool changeover time through the ability to replace used heads instead of an entire tool. Since it takes no more than one minute for tool exchange, setup time can significantly be reduced to as short as one tenth of the time it would typically take to replace solid carbide end mills for maximum productivity and cost effectiveness. With over 13,000 possible head-shank combinations available, TungMeister can readily provide tooling flexibility that enables users to find a solution for almost every application.

Products • October 3, 2020

MFWN-Mini

The additional cutter designs feature a smaller 5mm D.O.C. insert size with the same cost-efficient, double-sided, 6-edge design from the M-SIX line. The M-Six double-sided, 6-edge insert milling cutters with tough cutting edge due to wide design.n

Products • September 30, 2020

KCFM 45 Face Milling Cutter

With fixed and adjustable pocket seats, the new milling cutter provides the option for semi-finishing as well as fine-finishing applications, exceeding the highest surface quality requirements. With carbide, ceramic and PcBN inserts, this new tool is a flexible, cost-effective and user-friendly solution that is ideal for any type of CNC machining center.

Products • September 22, 2020

SGS Round Solid Carbide Tool Libraries

With this collaboration, Mastercam users can download both inch and metric SGS round solid carbide cutting tool libraries from the Mastercam Tech Exchange. The native Mastercam 3D tool databases are fully compatible with Mastercam 2020 and subsequent releases. These offer the latest KSPT innovations and SGS product introductions, including their latest Z-Carb HPR roughing line and H-Carb end mills for Dynamic Milling.

Products • August 21, 2020

Expanded MillQuadFeed

MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of machining passes. This is particularly effective to boost productivity in challenging rough milling operations of cast iron where a cutting depth can greatly vary on a single working surface.