Toolholders & Workholding

Products • June 12, 2020

CCS Chuck Switching System

Providing excellent repeatability that is guaranteed within 10 microns, the CCS can be installed in under three minutes on new or existing lathes that saves time and increases operator productivity. A standard adapter system provides automatic push off and easy mounting to all types of traditional or custom workholding including 2-jaw chucks, 3-jaw chucks, collet chucks, mandrels, and manual fixtures, among others.

Products • May 13, 2020

10×12 mm TungTurn-Jet Toolholders

TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the cut, which was difficult using a traditional external coolant nozzle method. Additionally, TungTurn-Jet features a second coolant outlet from the insert clearance side which not only improves chip control but also helps minimize flank wear for increased insert life and productivity. n

Products • May 13, 2020

DrillMeister 12xD Drill Body

DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of the replaced tool.

Products • April 30, 2020

DuoJust-Cut’s JXPS Insert

DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its "dual-rake" cutting edge which is designed to promote optimal chip control and evacuation without compromising surface integrity. n

Products • April 27, 2020

Expanded Range of Jetstream Tooling Holders

By placing high-pressure coolant directly in the cutting zone, JETI technology ensures superior chip and temperature control. For further process optimization, holders equipped with Jetstream Tooling Duo feature a second coolant outlet from the clearance side that can be turned on or off depending on part-processing requirements.

Products • April 24, 2020

Nakamura-Tome JX-250 High Performance Multitasking Turning Center

To optimize part transfer, independent right spindle guideways on lower turrets minimize the distance between the spindles at 11.8" (300 mm). For highest processing flexibility, a single or twin lower turret design is offered with overlapping travels and Y-Axis box guideways are standard. The new multitasking machining center provides up to 168 tool stations.n

Products • April 17, 2020

CSD-300II Front Facing Twin Spindle Lathe

For exceptionally quick and accurate turning of a variety of parts, turret index times are as low as .19 seconds, robot cycle times 17.9 seconds and loading times 4.8 seconds. An optimized bed design, with a grooving width of 14mm, renders this lathe exceptionally rigid.

Products • April 16, 2020

Standard Parts of AISI 316L (A4) Stainless Steel

The austenitic AISI 316L (A4) stainless steel receives its high resistance to chlorides and acids primarily from the chromium, nickel, and molybdenum constituents. This predestines the AISI 316L (A4) standard parts from Winco for use on ships and other offshore sites, in swimming pools with chlorinated or mineral-rich waters and, anywhere else that requires such thorough cleaning.

Products • April 15, 2020

EconoMaster Line of Drilling Units

The EconoMaster drilling unit features low power and air consumption, adjustable motor housing, adjustable total stroke up to 4", hydraulic feed control cylinder, J33 taper spindle end, 0-1/2" drill chuck, electric front & rear position limit switches, belt tensioner and chrome-plated quill. Basic unit weight is 45 lbs. n

Products • April 14, 2020

G3051-P Grooving System

The GD8 geometry has been specifically developed for grooving along the shoulders and grooving of large diameters without interference of the insert with the finished workpiece. The VG8 geometry has been developed for finishing operations behind a collar.

Products • April 8, 2020

ESPRIT 2020

ESPRIT 2020 features plentiful updates for Swiss-type machining. This technique is defined by its small, often intricate parts. Medical devices, such as bone screws, are typically manufactured on Swiss-type machines. ESPRIT's 2020 update introduces or enhances support for 200 different Swiss-type machine models.

Products • April 8, 2020

CG Pistol Grip Changing Fixture

The pistol grip changing fixture is easiest way to change MicroCentric collets. Simply insert the pins onto the front face of the collet and squeeze the handle. A locking mechanism in the handle keeps the fixture collapsed while installing and removing the collet.