Resources
Blind Resources
Explore 35 published CTE resources related to Blind across 4 articles, 25 products, 2 videos, and 4 news items.
4
Articles
25
Products
2
Videos
4
News
Articles
4 articles
Products
25 products
Videos
2 videos
News
4 news items
Browse
Browse all Blind resources
Browse results
Efficient treatment for wastewater compliance
The metal machining, fabrciation and finishing industries must meet EPA and local wastewater requirements for effluent. Under the Clean Water Act, the EPA has identified 65 pollutants and classes of pollutants as "toxic pollutants," of which 126 specific substances have been designated "priority" toxic pollutants. Failing to meet these requirements can result in severe fines that quickly escalate.
Non-contact metrology for advanced manufacturing
To contact or not to contact. That is the measurement question.
SPERONI SPI (Simple Post Interface)
As opposed to measuring, printing a label and punching the data into the control, SPI prints a tool label with a QR code at the presetter that's then read by the SPI module at the machine control. The system can also be configured to send measurements directly into the tool NC's offset table.
GARANT Master Steel DEEP
Internal tests show the new GARANT Master Steel DEEP achieved impressive results in comparison to its predecessor and products from competitors: up to 30 percent higher metal removal rate, up to 70 percent higher process reliability and three times longer tool life.
Virtual, Global Showroom
Visitors can experience Okuma's showroom at their convenience with a self-guided tour. A helpful navigational guide allows visitors to explore various areas of the showroom which include machines, technologies, service programs, podcasts, partner highlights, machine specials, and an overview of Okuma's industry-leading distribution network.
LabAmp 5167A and 5165A Laboratory Charge Amplifiers
LabAmp 5167A and 5165A – that combine high signal quality with exceptional flexibility, state-of-the-art operability and excellent connectivity. Low noise, a broad measuring range and wide-ranging filter options open up virtually unlimited possibilities for measurements. Also, multiple LabAmp devices can be combined with one another: for example, measurement values from dynamometers can be evaluated in correlation with those from accelerometers.
RS6 Laser Scanner
Built using SHINE technology (Systematic High-Intelligence Noise Elimination), the RS6 laser scanner always delivers full scanning performance, even on the most challenging surfaces. Whether it's a glossy black plastic automotive body part or a molded carbon-fiber component, this scanner scans without any reduction in quality or productivity.
Automated mixed batch regrinding with RFID workflow
Schunk, a premium tooling and resharpening company in Germany, utilizes state-of-the-art grinding systems and an ANCA workflow RFID system to finish job packets in a chaotic fashion driven by production needs rather than by job order.
CNC upgrade boosts cutting tool maker’s grinding production
The US cutting tool manufacturer McQuade Industries Inc. has implemented a CNC upgrade program for its roster of 5-axis insert grinders, and the upgrades shaved more than ten minutes per part off the production time of complex geometry cutting tools.
Secomax CW100 Ceramic Insert Grades
The CW100 grade expansion encompasses four new round insert formats with two geometries, E-01020 and T-01020, and four grooving insert geometries with widths of 3.175 mm (0.125"), 6.35 mm (0.25") and 7.925 mm (0.312").
Ceratizit’s virtual event showcases industry’s latest innovations
Registration is now open for Ceratizit's virtual event that runs from Sept. 30 to Oct.
Production machine turns out 24′ propellers
Submarine propellers traditionally take a long time to produce. They are large and have tight tolerances. A Starrag machining center was selecting to produce the 24' propellers.
