Resources
Blind Resources
Explore 35 published CTE resources related to Blind across 4 articles, 25 products, 2 videos, and 4 news items.
4
Articles
25
Products
2
Videos
4
News
Articles
4 articles
Products
25 products
Videos
2 videos
News
4 news items
Browse
Browse all Blind resources
Browse results
Arch Cutting Tools hires Bill Orris
ARCH Cutting Tools is pleased to announce and welcome Bill Orris as Manager of Technical Product and Sales Training.
Do stocks perform better when manufacturing is booming?
Manufacturing is booming. Many say that's great news for the stock market because increased manufacturing activity is evidence of a stronger economy. This seems logical, but does data support such a conclusion? And is it prudent to use manufacturing indicators to time your exposure to stocks?
Drier is better …
While this statement may not applicable across the board with machine tool applications, it certainly rings true when used in context with air supply to machine tool spindles. More often than not we have found that poor quality air supply to spindles is a significant factor in premature machine tool spindle failures.
SV-1000 Digital Video Borescope
Toshiba America Information Systems' (TAIS) Imaging Systems Division introduces a small, digital video borescope with illumination, the SV-1000. The small, water-resistant chip-on-tip inspection camera measures only 1.6 mm diam. and features an integrated LED light for illumination within the 1.9-meter flexible shaft.
Online Standards-Based Video Training and Certified Credentialing
The Mitutoyo Institute of Metrology now provides free online standards-based calibration video training with the opportunity to earn certified credentials in dimensional calibration – a first of its kind in the U.S. The online training videos are available for free with no obligation for testing.
The various stages of automation collaboration
There are no collaborative robots, only robots with collaborative applications. That's according to Simon Whitton, regional division manager of North America for KUKA Robotics Corp., Shelby Township, Michigan.
SVL-2115 Automated Lapping Machine
Sunnen's SVL-2115 automated lapping machine brings increased productivity and part consistency to what is traditionally a manual process. Based on the same proven SV-2115 honing system, the SVL-2115 provides single setup processing of hydraulic valves, sleeves, fuel system components and other parts that are prone to distortion when honed.
Hydraulic Chucks for Swiss-Type Lathes
BIG KAISER says its hydraulic chucks for Swiss-type lathes are the first improvement to this technology in more than 30 years. These toolholders use a single wrench, which makes for a quick and easy change of the cutting tools on a gang slide.
H330 Series Endmill
The H330 Series is engineered exclusively for high-speed milling of Aluminum applications.
Second-Generation PremierPlus Technology
ANCA second-generation PremierPlus technology ensures consistent and efficient tool runout. With three times greater clamping force, tools are held more securely when grinding, increasing the consistency of tool geometry across a batch of tools. As the clamping force is increased it means more force is required to open the collet.
Smart Workstation
Bosch Rexroth and Tulip announce the launch of a Smart Workstation, a joint customer-focused product that combines Bosch's manual production system with Tulip's Manufacturing App Platform to create a powerful Industry 4.0 workstation. n
Pamela Sims promoted at Motion Industries Inc.
Birmingham, AL – Motion Industries, Inc., a distributor of maintenance, repair, and operation replacement parts and a wholly owned subsidiary of Genuine Parts Company, announced the promotion of Pamela Sims to Vice President of Marketing, effective September 1, 2018.
