Control Systems

Highlights include a new customizable green sensor type called Green Flex. This versatile cyclic sensor monitoring type now allows for specification of the required state of the sensor at the start and end of the ready window. The sensor can be set to require a specific number of actuations inside the ready window.

The basic configuration of the CX20x3 includes two independent Gbit Ethernet interfaces, four USB 3.1 Gen. 2 and one DVI-D interface. In addition to the CPU and chipset, the basic module also includes 8 GB RAM. The controller boots from a removable CFast flash card. The CPU has 128 kB of internal NOVRAM as persistent data memory if a UPS is not used. A fieldbus and serial interface are available as options. All other components in the CX2000 family can be connected via the high-pole connections on both sides.

The most prominent feature of the MAZATROL SmoothEz CNC is its 15" capacitive touch-screen display, which accommodates a full-width on-screen keyboard or up to 60 lines of code. The NC system operates on two 800 MHz CPUs with an expanded 512 MB of DDR3-SDRAM memory. In addition to its redesigned LAUNCHER screen, the new control also has an expanded range of software features, including SMOOTH Machining Configuration, QUICK MAZATROL, and MAZATROL TWINS that were recently debuted on Mazak’s highly advanced MAZATROL SmoothAi CNC.

On the new TURNPWR, a 12.1” high-resolution display boasts a screen layout that is clearly arranged and user friendly.  Preview graphics in the editor illustrate the individual machining steps for programming the contour as well as corresponding tool path generated using only dimensions pulled from a production drawing.  It also accepts DXF files.

The E-727 nanopositioning controller features an advanced digital servo providing significant advantages compared to conventional analog piezo nanopositioning controllers. Digital filters provide better linearity and higher bandwidth as well as on-the-fly parameter adaptation to changed loads or production requirements. Software-adjustable notch filters allow the users to make full use of their piezo-mechanisms by suppressing mechanical resonances and yielding higher throughput and reducing step-and-settle times to milliseconds. 

The EnDat 3 protocol carries forward the features and benefits of the well-established original EnDat. To achieve this, EnDat 3 relies on a new architecture that not only preserves and improves upon proven technology but also maintains the best possible continuity and compatibility with previous versions.

With 360 degree rotation range and 20N load capacity, the RS-40 V7 stage boasts high angular velocity of 20°/sec and minimum incremental motion and repeatability of 87 µrad. The 110, M-111 and M-112 vacuum linear stage series provide travel ranges of 5, 15 and 25mm and are suitable for vacuum up to 10-6 hPa.

To assist in product selection and application optimization, a variety of "Knowledge Base" resource material is available in the online store including application notes, success stories and related documents.