Grinding Wheels

V-PRIME grinding wheels significantly increase productivity and reduce cycle times due to requiring lower grinding forces and permitting higher feed rates. User-friendly off-line dressing optimizes grinding wheel preparation, saving time and cost. The new wheels also offer an excellent price/ performance ratio.

Premium Ceramic Grain - provides a cooler cut for a longer lasting disc; 50 Grit – less emphasis on aggression with refined surface finish; 36 Grit – best combination of stock. Works well on stainless steel & carbon steel, weld bead removal, chamfering and beveling, flame-cut steel removal, edge grinding and deburring.

With a smaller diameter, quick change discs provide ease of use on intricate parts and excellent control when shaping or blending surface portions, especially on flat surfaces.  Moderate flexibility of quick change discs and their holders allows contouring and access to inner corners.  These unique quick change functionality reduces changeover downtime and eases transitions between grit, material, or even abrasive type where multi-step processes are required.

Because aluminum has a much lower melting temperature than other metals, keeping aluminum cool while grinding and finishing is a big challenge for welders and fabricators. The Blue-Kote disc cloth’s net structure resists clogging on soft materials, and its sanded surface stays cooler and avoids burning the work surface.

Norton Winter AEON Grinding Wheels have a single usable abrasive layer design, with diamond or cBN particles mechanically fixed onto the core surface by an electrochemical process of nickel deposition. This unique layer design provides high grit retention levels for long wheel life. To save costs, the wheel core can be re-used. Once the abrasive grains are worn, the core of the wheel can be re-plated with new diamond or cBN grain in a continuous re-plating cycle.

The Tiger large diameter wheels for performance cutting and the Wolverine wheels for standard cutting include specialty products. Among those are the Tiger AO wheels for stud cutting, as well as Tiger AO and Wolverine AO wheels with single center reinforcement for increased speeds and burr-free cutting — both designed for use on chop saws. The line of wheels for stationary saws includes Tiger AO wheels for longer life and Wolverine AO for faster cutting. 

Weiler Abrasives is offering the 4-1/2 inch Tiger Aluminum flap discs in Type 27 or Type 29 with either 7/8 or 5/8-11 arbor holes and two grit options. The 36-grit disc is a good choice for chamfering, weld removal and stock removal, while the 60-grit disc is ideal for weld blending, finishing and cosmetic detail work.