Jaws

Get into quick change for a fraction of the cost of a quick-change chuck. The System 3 Quick Change Base Jaws from Huron Machine Products bolt to your chuck like a standard top jaw.

Dillon Manufacturing specializes in premium chuck jaw products for large-diameter (15-60 inch) chucks. Matching specialized workholding to the large diameter chuck allows faster, easier and more profitable setups. Available in standard configurations to fit virtually any chuck manufacturer, many sizes of hard or soft top jaws, or full grip (pie) jaws are available from stock or with industry-leading lead times.

A major manufacturing facilities upgrade enables Dillon Chuck Jaws to add the manufacturing of 2mm x 60° and 2.5mm x 60° serrations for hard-to-find top jaws, hard jaws and full-grip jaws that fit the corresponding chuck master jaws of the same hard to locate pitch. They now have the capability to manufacture virtually any serration, including 1.5mm x60°, 2mm x 60°, 2.5mm x60°, 3mm x 60°, 1/16th x 90° and 3/32 x 90°.

Dillon full-grip jaws, machined from 6061 extruded aluminum, provide added options for full-grip jaw customers who have traditionally used cast aluminum jaws. Available from 5" to 24" in diameter, these jaws can be modified to heights of 10” and provide widths that extend beyond the chuck face diameter.

Kurt DoveLock master jaws are designed to be installed in replacement of standard cap screw jaws and create a quick-change capability. Once the DoveLock master jaws are installed into the vise they perform as a receiver for the replaceable jaws and are installed or removed by loosening three quick clamps in the top of each master jaw.

SCHUNK says the intelligent jaw design of the SCHUNK UVB-HS soft chuck jaws defines a new class of efficiency in lathe chuck technology. With a combination of overheight and angle cutting, it achieves a whole bundle of efficiency effects during finish machining of workpieces.

Dillon Manufacturing full-grip pie jaws made of 1018 CR steel are now available in diameters from 6 to 15 inches, with heights of 2, 4 and 6 inches. Constructed of 1018 CRS, these heat-treatable and weldable steel jaws allow for complete gripping of the workpiece to maintain accuracy.