Home

Products

+ click to show 36 results
QCPSS Heavy Duty Sliding Locks
Two tip types of the QCPSS are available: A flat tip that helps minimize damage to an object, and a diamond-surface tip that provides high holding force. Both versions provide 247 lb. clamping force. The clamp body is made from 303 stainless steel. The handle is made from 304 stainless steel. The sliding locks are supplied with two M4 socket head…
Quarter-Turn Clamping Fastener
The flat clamping fastener, with machining spacing tolerance of ±0.1 and repeatability of ±0.3, is made to pair with a locking receptacle, which is available separately. Plate thickness of 6 mm or more can be used with the fastener and receptacle. A clamping and holding force as high as 6.7 lb. (30N) can be achieved.
Hand Wheels and Cranks
The hand wheels come equipped with fixed handles, revolving handles or no handles. Handwheels are made of a variety of materials such as cast iron, aluminum, Duroplast plastic, stainless steel and finished including chrome plated and powder baked. Cranks are available in a straight or offset style. They are available in cast iron and high-density…
Shaft Locking Clamps
Pneumatic Shaft-Locking Clamps are designed for quick change applications. In the pneumatic version, when connected to air, the clamp allows clamping/unclamping in one operation. They are perfect for secure clamping of sliding shafts and for use on machines where many clamping or unclamping cycles are run, or for multi-clamping applications. With…
TG GripSerts
TG GripSerts workholding inserts offer many advantages over traditional clamping systems. Their special triangular shape with a 5° tapering and teeth geometry combine to provide exceptional clamping stability with no need for pre-machining or dovetailing workpieces. They are designed to absorb and dampen vibrations, providing secure and stable…
Heavy-Duty Knob Locking Pins
The heavy-duty pins provide for positive locking in quick change applications where there is frequent insertion and removal of a fastener. They are designed to be used with  heavy duty receptacles made specifically to pair with the pins. The wedge of the locking pin pushes out the ball against the tapered surface of the receptacle to clamp the two…
Mechanical Linear Actuators
With the synchro-use dual actuators, the two carriages move toward each other when the handle shaft is turned clockwise. The two carriages move away from each other when the handle shaft is turned counterclockwise. As with the standard linear actuators, they can be used with simple manual adjustments without complex processes of parts selection,…
Nutrunner Clamps
Fixtureworks nutrunner clamps provide mechanical clamping without the need for hydraulic piping. This simplifies fixture design and maintenance, shortens preparation time, and lowers costs. They are equipped with a hex head for automated clamping and unclamping. Spiral-acting swing clamps and block pull clamp types are both available. They offer…
OD/ID Form Holding Clamps
For OD clamping, the aluminum jaws can be machined to custom fit the workpiece. For ID clamping, the workpiece is placed over ID jaws, which expand outward using a tapered pin (available separately). The part repeatability is +/- 0.03 mm, and the jaw locating repeatability of +/-0.02 mm.
One Touch Push Lock Clamps
The piston diameters range from 8.5 to 10 mm and provide 180 to 330 lb. clamping force. The push lock clamps come in orange or black plastic hands, as well as metal handles. They are ideal for applications such as positioning of guide rollers and positioning of fixturing tables.
Pneumatic Clamp Fasteners
The lineup includes receptacles that are designed to be threaded into a base with a stainless lock nut or in blind hole installation and used with PBLC pneumatic ball locking clamps.
Flex Locator System
The locators are available in quarter-turn on/off knobs, adjustable handle, cam handle and hex head styles, and are supported with receivers, covers and adjustable torque wrench.
Gripper Inserts
The lineup includes solid carbide grippers for high wear and high load applications. While the SofTop™ urethane grippers are available in a variety of durometers and are permanently bonded to a 300 series stainless steel pad. The non-marking, non-staining urethane provides excellent protection against damage on delicate work surfaces.
Manual-Style Fixture Clamps
The clamps provide quick, secure, and precise workpiece workholding and are manufactured to the highest quality specifications. The product mix includes many clamp accessories such as mounting brackets, adaptors, bars and caps. In both mini and heavy-duty styles, the various clamp configurations provide clamping forces from as little as 2 lb. on a…
Quick Action Sliding Locks
The sliding locks are particularly ideal for clamping in tight areas with non-swiveling handles. The body is made from nickel-plated 1045 steel. The handle is made from nickel-plated 4140 alloy steel, quenched and tempered. The push bar is made from 1045 steel.
Quick Release Clamps and Ball Lock Fasteners
Quick release clamp fasteners help increase productivity by reducing set up times, eliminating errors in assembly and installation and simplifying procedures. They are ideal for frequent set ups, regularly or to reconfigure production equipment. Most specifically, these fasteners may be used in automation to attach conveyors, star wheels, guide…
One Touch Indexing Clamps
The quarter-turn knobs allow for quick locking and unlocking without the use of tools. The ON/OFF markings and perceptible "click" indicate the locked and unlocked states. Red indicator band is visible when fastener is in the OFF (unclamped) position.
5-Axis Modular Pull Clamping System
Compact in size and completely modular, this versatile and simple clamping system allows easy height adjustment by stacking the modules. The pins or screws can be easily attached to the underside of a plate or a workpiece for a standardized locating.
Custom Modifications for Standard Rollers and Bumpers
The products can be custom modified in various dimensions, shapes and sizes to meet the specific application requirements. For example, the outside diameter (O.D.) of a roller could be turned down, or a bumper of a certain width could be produced. These modifications eliminate the typical design and production time necessary for a custom roller or…
Flex Locators
Flex Locator System consists of tapered pins and receiving bushings. In combination, these parts are designed to be mounted on fixture bases and plates to allow for highly accurate locating and positioning with repeatability of 0.01 mm. Fastener-receptacle pairs replace nut-and-bolt assembly so that operators swap out fixture plates and other…
Vise Force Wedge Clamps
Fixtureworks introduces Vise Force wedge clamps from Paws Workholding to its extensive lineup of manual clamps and workholding solutions. Vise Force wedge clamps provide a fast and flexible workholding solution and are ideal for clamping multiple workpieces.
Ring-Handle Detent Pins
Fixtureworks has introduced its new lineup of ring-handle detent pins in steel and stainless steel. Detent pins provide a secure, quick, easy and positive engagement for fastening, locating and alignment applications. They are ideal for applications that require frequent, repetitive use. The pins, with ring handle, work within commercial drill…
Kurt DX6 Vise
Fixtureworks offers the Kurt DX6 vise with TG GripSert jaws and gripper inserts to its lineup. With a clamping capacity of up to 9 in., the Kurt DX6 CrossOver vise, the latest of Kurt D-series vises, provides improved bearing pack, all-directional alignment and a reduction in jaw lift.
Bearing Wheel Covers
Fixtureworks introduces an extensive lineup of bearing wheel covers from Fairlane Products. These bearing wheel assemblies are in stock and ready to ship to help reduce potential lead times and eliminate sourcing problems and tooling costs.
TriMax Production Vises and TG GripSerts Carbide Gripper Inserts
Fixtureworks LLC offers TriMax production vises, which help users maximize a machine’s potential with multiple-part clamping, quick-change components and easy adjustment, and TG GripSerts carbide gripper inserts, which are designed for ultralow-profile clamping with no dovetail workpiece preparation.
TriGrip Carbide Gripper Inserts and TriMax Vises
Fixtureworks has introduced its lineup of ultra-low profile TriGrip carbide gripper inserts and TriMax vises. TriGrip carbide gripper inserts are designed for ultralow profile 0.14 in. (3.5 mm) clamping with no dovetail workpiece preparation.
One-Touch Manual Clamps
Fixtureworks offers an extensive new lineup of One-Touch manual clamps. One-Touch clamps offer easy and efficient clamping and unclamping of a workpiece in one simple operation. Each clamp is designed to eliminate the need for tools when applying the clamping force and helps reduce setup time and increases productivity. The lineup of One-Touch…
Imao 'One-Touch' Fasteners
Fixtureworks offers a complete lineup of Imao "One-Touch" fasteners.
Fairlane Urethane-covered Bearings
Fixtureworks offers Fairlane Products Urethane Covered Bearings.
Imao Quarter Turn Clamps
Fixtureworks says the Quarter Turn Clamps from Imao are a highly visible and safety lock mechanism for quicker fastening than a typical SHCS.
Kipp Index Plungers
Fixtureworks offers a complete lineup of Kipp hand retractable index plungers to its workholding and fixturing technologies.
Kipp Spring Plungers
Fixtureworks offers an expanded lineup of Kipp Spring Plungers to its offering of workholding and fixturing technologies.
One-Touch Mini Swing Clamps
Fixtureworks offers an expanded lineup of Imao "One-Touch" style clamps with the addition of higher clamping force, compact and mini-sized selection.
mPower Workholding System
Fixtureworks offers the integrated mPower workholding system from Modern Industries.
Parts Handling
Nothing is more fundamental to successful manufacturing than ensuring that parts are not marred, scratched or otherwise damaged during the manufacturing process. That is why Fixtureworks makes available a wide range of rollers and bumpers from Fairlane Products, all designed to protect parts ranging from those that are delicate or fragile to…
FixtureWorks
As part of its ongoing drive to provide customers—OEMs, shop owners, manufacturing engineers, tooling specialists, setup technicians, fixture, workholding and jig designers—with the innovative tools and technologies needed to enhance quality and productivity throughput, Fixtureworkscontinues to expand its product offering to…

Videos

+ click to show 2 results

Modular Pull Clamping System from Fixtureworks

The cylindrical body design on this innovative clamping system is ideal for machining from 5 sides with no tool interference and no need for additional machining setup. It can be used as a mechanical zero point clamping system for quick fixture change with precise dual contact that provides 0.005 mm locating repeatability. Clamping screws are used…

The Innovative 5-Axis Modular Pull Clamping System

This Fixtureworks video highlights the innovative Modular Pull Clamping System, a simple clamping system that allows 5-axis machining without tool interference. The innovative pull clamps can be used as a mechanical zero-point clamping system for quick fixture change with locating repeatability of 5 microns.

People & Companies

+ click to show 1 results

Fixtureworks to feature extensive product line at Automate Show

Fixtureworks, a supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several product lines at the 2023 Automate Show.