Contact Details
Seco Tools line of 150.10‑JETI family of parting-off blades and square-shank blocks now includes a new VDI block design. Adapters directly hold the 150.10-JETI parting-off blades onto the VDI turret and offer streamlined delivery of high-pressure coolant to the cutting zone without the use of hoses.
These blades and adapters quickly and efficiently remove heat during parting-off operations, resulting in high levels of productivity and long, predictable tool life, according to the company. Coolant is delivered internally to the adapter via the turret and then reaches the cutting zone through the coolant holes in the blades. The fast, direct transfer of coolant to the cutting edge is made possible by Seco’s advanced Jetstream Tooling technology.
The 150.10-JETI family safely and effectively evacuates chips for better finished part quality and tool life. Adjustable edge heights optimize positioning.
The 150.10-JETI expansion includes face mount adapters for VDI30, VDI40 and VDI50 turrets and star mount adapters for VDI25, VDI30 and VDI40 turrets. The adapters hold 20-mm and 25-mm HSS parting-off blades. The range is also compatible with MDT reinforced blades with internal coolant.
Related Glossary Terms
- coolant
coolant
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
- high-speed steels ( HSS)
high-speed steels ( HSS)
Available in two major types: tungsten high-speed steels (designated by letter T having tungsten as the principal alloying element) and molybdenum high-speed steels (designated by letter M having molybdenum as the principal alloying element). The type T high-speed steels containing cobalt have higher wear resistance and greater red (hot) hardness, withstanding cutting temperature up to 1,100º F (590º C). The type T steels are used to fabricate metalcutting tools (milling cutters, drills, reamers and taps), woodworking tools, various types of punches and dies, ball and roller bearings. The type M steels are used for cutting tools and various types of dies.
PRODUCTS
