Home

Dyna Contact Ceramic Taper Gage

June 06, 2018
Dyna Contact Ceramic Taper Gage

BIG KAISER Precision Tooling Inc. has added the Dyna Contact to its product offering. The ceramic taper gage allows inspection of machine spindle tapers at a glance.

Dyna Contact is a precise gage used to check the geometric accuracy of a machine spindle taper by visually comparing the contact of the gage to the spindle. A layout dye is applied to the Dyna Contact before inserting into the machine spindle. Upon removal, an operator can easily check for taper contact and determine if the machine spindle will have proper contact with tool holders. The Dyna Contact is compatible with all steep taper specifications, including CAT, BT and DIN.

The ceramic material of the Dyna Contact makes it more thermally stable than steel. This taper gage is also rustproof, 10 times more wear resistant than steel and not subject to age deterioration. Having a product to help check the machine spindle is essential to ensure high-precision machining is taking place at all times.

 

Additional Products from BIG DAISHOWA Inc.

Big-Plus BBT

Big-Plus BBT Range of Fullcut Mill Tools Expanded for Wider Applications and Better Depths
The larger diameter cutter and new lengths both boost the Fullcut Mill FCM BBT line’s already-considerable versatility, allowing machinists to tailor their tool selections for many different applications. The BIG-PLUS BBT shank products are compatible with both BIG-PLUS and existing BT spindle…

C3 Series of BIG CAPTO Tool Holders

C3 Tool Holders Help Increase Efficiency and Precision for Small Lathes
The BIG CAPTO C3 square holders for turning applications come in left and right orientation. The turning application holders—C3-180-BH16R-2058 and C3-180-BH16L-2058—are mono-block holders. Their insert clamps are tough and reliable, adding on to the already inherently high rigidity of mono-block…

Mega Double Power Chuck

Mega 12DS Power Chuck for Heavy-Duty End Milling
The Mega Double Power Chuck system features an expanded contact diameter of the nut to the flange, which provides the highest rigidity—as if the chuck and nut were one solid piece. This superior rigidity ensures heavy duty machining without chatter.

Base Master Measuring Devices Upgrades

Base Master lineup Gains 360° LED Indicator and Swiss-Lathe
The Base Master lineup is used with all types of machines and materials, including non-conductive cutting tools, workpieces and machine tools. Quickly measure workpiece offsets, tool lengths and cutting edges with zero risk of damage or breakage at submillimeter levels when needed.

MU-VZ and SU-VZ Dial Indicator Stands

Dial Indicator Stands With 220 lb. Capacity
The SU Type has a length of 235mm and rubber bellows. The larger MU Type is 360mm in length and has a reinforced ball joint with a large collar. Both use serrated washers instead of flat washers to reduce slippage and increase stability of the center joint. 

Model SDF57 Arbor-Style Face Mill Holders

Large, Long Mill Holders With Smart Damper Vibration Control
The Model SDF57 assembly has an outside diameter of 2.83" and allows users of 3" face mills to access up to 19.68" of reach, the longest tool assembly in the industry using standard components. Face milling components used in construction equipment, aerospace and oil/gas industries…

Standard Type, F Type, R Type Chucks

Hydraulic Chuck Line for Swiss Lathes Expanded
To minimize machine downtime and provide operator safety, these Hydraulic Chucks use a simple hex wrench that requires only two to three turns for both clamping and unclamping. Tightening is complete when the clamping screw hits the bottom; controlling tightening torque is not needed. Once a…

SW BIG CAPTO Rough Boring Head

One-Piece Body Provides for Highly Repeatable Accuracy and Torque Transmission
The SW BIG CAPTO Rough Boring Head makes it possible to perform rough and finish boring processes seamlessly with the finishing heads it has offered for years. BIG KAISER currently offers the widest range of rotating BIG CAPTO tooling of any provider. 

Chip Blower

Chip Blower for Use With Hydraulic and Milling Chucks
The Chip Blower automates in-machine cleaning of coolant and chips by delivering high-volume air flow with spindle rotation. When not in use, the Chip Blower fits easily into any automatic tool change system for vertical, horizontal or multi-tasking machining centers. The Chip Blower can be used…

EWN Smart Damper Precision Boring Heads

Small Smart Damper Boring Head Options
BIG KAISER’s modular CK/CKB system allows for versatility in the length of tooling combinations, up to a maximum of 10 times diameter and can run on nearly every major spindle interface. All tools are coolant-through and have three different insert holder options per head size. The tried-and-true…

PRODUCTS

MunchMan Dual-Belt Conveyor
11/20/2024
Jorgensen Conveyor and Filtration Solutions, Mequon, Wisconsin, highlighted its distinctive…

AVR400 CNC Vision System
10/23/2024
The Starrett AVR400 offers full CNC capabilities including X-Y-Z positioning and comprehensive zoom…

TIN Coated Gages
10/23/2024
TIN Coated Thread Gages have high dimensionally stable HSS construction with TIN coating that…

View more articles