Drills & Drill Bits

Products • October 18, 2017

Perfomax Indexable Insert Drill

With a new reengineered design, the Seco Perfomax indexable insert drill delivers higher drilling parameters and longer tool life as well as exceptional chip control and evacuation. The drill's innovative features include new flute designs with special anti-friction surfaces and laser hardened fronts for added strength, stability and accuracy.

Products • October 5, 2017

SHARK-Cut Multipurpose Cutting Tool Platform

Arno Werkzeuge USA announces the introduction of their new SHARK-Cut multipurpose cutting tool platform for a range of turning applications. SHARK-Cut allows machines shops to use just one tool for four different machining operations including: facing, drilling, boring and turning.

Products • October 2, 2017

KenTIP FS Modular Drill

Some good ideas can be made even better. Much better. This was certainly the case when Kennametal engineers took the strength and versatility of their proven KSEM modular drill system and combined it with the ease of use and low feed forces of its smaller companion drill, KenTIP, the company reports. The resulting fusion of these advanced holemaking technologies is the KenTIP FS, a 6 mm to 26 mm, 1.5 to 12 x D modular drill that's simple to use, produces good hole quality, and is tough enough to compete with solid-carbide drills across a wide range of materials.

Products • September 19, 2017

Magic Drill DRV

Kyocera announced that it has developed a new line of indexable modular drills, Magic Drill DRV, to be used mainly for hole drilling in the machine tool business. Ideally suited for the automobile, aviation and medical device industries, the new indexable drills combine a chemical vapor deposition (CVD) coated insert on the outer edge and a physical vapor deposition (PVD) coated insert on the inner edge for the first time, enabling high-speed and high-efficiency processing.

Products • September 19, 2017

Solid-Carbide Feedmax –P Drill

With the new Seco Feedmax –P drill, manufacturers gain the potential to significantly boost holemaking performance for ISO P (steel), as well as cast iron, workpiece materials. The solid-carbide Feedmax –P drills can increase drilling productivity by up to 35 percent while also providing longer tool life due to the combination of the drill's new geometry and advanced coating.

Products • September 7, 2017

»PS-plus« PCD Drill

Based on the previous success of PCD drill type »PS« during burr and delamination free machining of fiber composites – also in combination with aluminum – so-called stacks components – Lach Diamond developed the PCD drill type »PS-plus«.

Products • August 9, 2017

Polyethylene Carrying Case for Super Speed Tip (SST) Drill Bits

Walter Surface Technologies announced the launch of its professional-grade, shock-resistant, extra-thick, polyethylene carrying case for the company's Super Speed Tip (SST) drill bits. Optimized from the original Walter metal index containers, the new highly visible orange polyethylene case offers increased durability and improved drill bit storage, according to the company.

Products • August 1, 2017

MXDSR (Micro Xtreme Drill Solid Regular) 5X Drills

With the success of the Twister XD series of high-performance drills, M.A. Ford is expanding the offering to include micro sizes down to 0.50mm in diameter. The MXDSR (Micro Xtreme Drill Solid Regular) 5X drills are designed for high-performance microdrilling in a broad range of materials. n

Products • June 14, 2017

Super Speed Tip Drill Bits

Walter Surface Technologies announces the introduction of SST (Super Speed Tip) drill bits in the United States.

Products • May 30, 2017

Type PS PCD Twist Drills

LACH DIAMOND says its newly developed PCD twist drill type PS saves up to 75 percent of time by reducing three previously necessary steps to one process. The new PCD twist drill completes piloting, drilling and reaming all in one "shot."

Products • May 19, 2017

Force X Solid-Carbide Drill

The Dormer Force X upgrades the Dormer MPX solid-carbide drill family with new geometry, corner design and edge preparation. The upgrade applies to the 3xD R457 and R458 and the 5xD R453 and R454, bringing them in-line with the newly launched 8xD R459.

Products • April 24, 2017

GEN3SYS XT Pro High-Penetration Drills

Allied Machine & Engineering announces its new GEN3SYS XT Pro line of high-penetration drilling products. The product line features enhanced holders and inserts with three unique geometries, and two advanced coatings.