BIDEMICS JP0 Grade

Contact Details

Tungaloy-NTK America, Inc.

Address

3726 N. Ventura Dr.

Arlington Heights

60004

IL

United States

Map It

Phone

630-227-3700

Toll Free Phone

888-554-8394

Fax

888-554-8392

View Website

Send Email

View Buyers Guide

November 24, 2020

BIDEMICS - JP0 Grade Finishes High Temp Alloy Parts at Speeds of 1600 SFM

Since its release in 2014, the BIDEMICS family of grades has greatly improved productivity for manufacturers. The newest addition to the group is JP0 for continuous cuts when finishing HRSA parts and machining at 700 up to 1600 SFM. It brings improved wear resistance to provide performance and consistency of machined part straightness. Take control of valuable machine time by switching from slow CBN & carbide to JP0 and increase part production.

Related Glossary Terms

cubic boron nitride ( CBN)
cubic boron nitride ( CBN)
Crystal manufactured from boron nitride under high pressure and temperature. Used to cut hard-to-machine ferrous and nickel-base materials up to 70 HRC. Second hardest material after diamond. See superabrasive tools.
wear resistance
wear resistance
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.

Additional Products from Tungaloy-NTK America, Inc.

BXA10 CBN Grade

Coated CBN Insert Grade in a Tipped Format for Turning Hardened Steel Parts

BXA10 incorporates a crater-wear-resistant PcBN substrate and the latest multilayer PVD coating for edge toughness, enhancing the grade’s wear and fracture resistance. The latest development will provide improved productivity, tool life, and surface integrity in continuous to light interrupted cuts…

10x12 mm TungTurn-Jet Toolholders

TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…

DrillMeister 12xD Drill Body

DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…

DuoJust-Cut’s JXPS Insert

DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…

DrillMeister Chamfering Holders

DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…

Expansion of Grade AH9130 to DMP Drill Head Line

DMP drill head are expanded in diameters from 10.3 mm through 19.8 mm

This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.

FineBeam BTA Drill Series AH8015 Grade Inserts

FineBeam BTA drill series to include AH8015 grade inserts with the G style chip former.

AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…

TungTurn-Jet System

The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…

SNG Coolant-Through Holders

Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…

Parting Blade CGP32-CHP

Tungaloy expands its TungCut series of grooving tools to include a parting blade CGP32-CHP with the ability to internally supply high-pressure coolant.

BIDEMICS JP0 Grade

Contact Details

Tungaloy-NTK America, Inc.

Related Glossary Terms

cubic boron nitride ( CBN)

wear resistance

Additional Products from Tungaloy-NTK America, Inc.