Tungaloy introduces CeramicSpeedMill for efficient milling of heat-resistant superalloys (HRSAs).
CeramicSpeedMill offers round ceramic inserts for milling HRSAs efficiently at elevated feeds and speeds. The negative, economical double-sided ceramic inserts offer superior cutting edge integrity. In addition, the new TS200 and TS300 of SiAlON ceramics grades combined with the close-pitch cutter design enables milling of nickel-base superalloys at cutting speeds of over 500 meters per minute (1,640 sfm) and greater feed rates for efficient milling of HRSAs commonly used for aerospace components.
Two standard ceramic grades are available: TS200 is a universal grade for finishing, while TS300 is designed for descaling and other roughing applications. The cutter body is offered in a bore (shell mill) style in diameters of 63 mm and 80 mm, and 2.5" and 3.0" for the inch market.
At a Glance:
Ceramic facemill with round ceramic inserts designed for machining heat-resistant superalloys
New SiAlON ceramic grade inserts provide wear and fracture resistance when machining at high feeds and speeds
Cutting tool materials based on aluminum oxide and silicon nitride. Ceramic tools can withstand higher cutting speeds than cemented carbide tools when machining hardened steels, cast irons and high-temperature alloys.
Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.
Since carbide shanks provide lower deflection than steel shanks, they enable aggressive machining with increased cutting parameters. This amounts to reduced machining time and increased productivity. Also, the new shanks provide excellent vibration resistance, enabling extremely productive…
AddMultiTurn provides the flexibility for OD, face, and profile turning operations in multi directions, which include high-feed back (pull) turning method, allowing toolpaths that turn in the opposite direction of conventional turning process at higher feeds. Multi-directional turning optimizes the…
DrillMeister is a super productive, accurate, and cost efficient exchangeable-head drill series. Its DMF counterboring drill head line now includes diameters from 20.0 mm to 25.9 mm, increasing the entire standard range from 6.0 mm to 25.9 mm (from .236″ to 1.020″).
Featuring superior cutting performance of solid carbide drills and the ease-of-use of the DrillMeister exchangeable head drill series, AddMeisterDrill small-diameter exchangeable head drills allow quick and secure exchanges of extremely small drill heads thanks to its dedicated key. In addition,…
The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic…
New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally…
The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.
AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased…
The small size-04 inserts also allow TungForce-Rec04 to have a higher teeth density than conventional shoulder cutters of the same size, boasting two teeth for an 8 mm diameter cutter and three for a 10 mm. This allows TungForce-Rec04 to run higher feed speed than competitors when being fed at the…
For job shops that are mass-producing small parts with Swiss lathes, minimizing material waste in the part-off process can be an extremely effective solution for cost savings. The 1.2 mm-wide (.047″-wide) grooving inserts can reduce the material waste produced by parting-off by up to 40% when…
PRODUCTS
