Tungaloy expands its DeepTriDrill line of indexable gundrills to include new drill diameters ranging from 12.0 mm to 13.5 mm.
With new drill sizes in the lineup, DeepTriDrill can now address diverse deep drilling needs of automotive and mold set parts for maximum efficiency and stability. In addition, the drill diameter can easily be altered in increments of 0.01 mm to the required hole sizes simply by placing dedicated adjusting shims beneath the guide pads, allowing an overall reduction of cycle time and manufacturing costs in diverse deep drilling applications.
At a Glance:
High precision H-class insert with unique cutting edge configuration provides hole accuracy at greater feed rates, while also ensuring smooth chip evacuation
Reduces tool setup time thanks to easy insert indexing
Fine adjustments of drill diameter are possible with dedicated adjusting shims
New drill diameters ranging from 12.0 mm to 13.5 mm
Length-to-diameter ratios available in 12xD, 20xD and 25xD
Shims available in thicknesses of 0.01 mm, 0.02 mm, 0.03 mm, 0.04 mm and 0.05 mm; one piece each, total of five shims included per set. Available in two shim sizes
Drill diameter adjustable range: +0.01 mm ~ +0.1 mm
BXA10 incorporates a crater-wear-resistant PcBN substrate and the latest multilayer PVD coating for edge toughness, enhancing the grade’s wear and fracture resistance. The latest development will provide improved productivity, tool life, and surface integrity in continuous to light interrupted cuts…
DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…
TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…
DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.
DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…
AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…
Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…
The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…
PRODUCTS
