DMH Drill Head Line

Contact Details

Tungaloy-NTK America, Inc.

Address

3726 N. Ventura Dr.

Arlington Heights

60004

IL

United States

Map It

Phone

630-227-3700

Toll Free Phone

888-554-8394

Fax

888-554-8392

View Website

Send Email

View Buyers Guide

November 09, 2022

48 DMH-Style Drill Heads Added for DrillMeister System

Tungaloy has added 48 new drill heads to its DMH drill head line of DrillMeister exchangeable drill head system.

DrillMeister is an innovative exchangeable head drill system that has both the efficiency of solid carbide drills and the productivity of indexable drills. The DMH drill head line now includes 48 new drill heads, expanding its drill diameter range from 10.0 to 20.0 millimeters (from .394 to .787 inches) with new drill diameters that previously did not exist.

The DMH drill head features a fracture resistant design that is suitable for applications that involve drilling holes through thin-walled sections of workpieces. In normal circumstances, thin walls tend to spring back on the drill after the drill pierces through and exits the hole. In the process, uncut material shifts and forms exit burrs that impose extra burdens on the drill edge. These problems inflict damage on drill corners, shortening tool life. The DMH drill head’s geometry protects drill corners from fracture damage, providing extended tool life and reduced downtime.

With the new drill heads in the line, DrillMeister can now address more extensive hole size requirements.

Additional Products from Tungaloy-NTK America, Inc.

AddMultiTurn Multi-Directional Turning Tool System

AddMultiTurn provides the flexibility for OD, face, and profile turning operations in multi directions, which include high-feed back (pull) turning method, allowing toolpaths that turn in the opposite direction of conventional turning process at higher feeds. Multi-directional turning optimizes the…

DrillMeister Expanded Diameter Range

DrillMeister is a super productive, accurate, and cost efficient exchangeable-head drill series. Its DMF counterboring drill head line now includes diameters from 20.0 mm to 25.9 mm, increasing the entire standard range from 6.0 mm to 25.9 mm (from .236″ to 1.020″).

AddMeisterDrill Expanded Drill Head Line

Featuring superior cutting performance of solid carbide drills and the ease-of-use of the DrillMeister exchangeable head drill series, AddMeisterDrill small-diameter exchangeable head drills allow quick and secure exchanges of extremely small drill heads thanks to its dedicated key. In addition,…

DoFeed LNMU0303UER Inserts

The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic…

DuoJust-Cut

New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally…

MiniForce-Turn

The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.

AH3225 Insert Grade

AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased…

Small TungForce-Rec04

The small size-04 inserts also allow TungForce-Rec04 to have a higher teeth density than conventional shoulder cutters of the same size, boasting two teeth for an 8 mm diameter cutter and three for a 10 mm. This allows TungForce-Rec04 to run higher feed speed than competitors when being fed at the…

TungCut Multifunctional Grooving System

For job shops that are mass-producing small parts with Swiss lathes, minimizing material waste in the part-off process can be an extremely effective solution for cost savings. The 1.2 mm-wide (.047″-wide) grooving inserts can reduce the material waste produced by parting-off by up to 40% when…

CBN inserts With HP-Style Chipbreaker

20 inserts in HP-style chipbreaker are now available in WavyJoint style; namely, 4QS-CNGG1204..-HP, 4QS-DNGG1504..-HP, 6QS-TNGG1604..-HP, and 4QS-VNGG1604..-HP inserts. Conventionally, CBN cutting tips are brazed onto the seats ground, usually on one side, on a cemented carbide insert body to form…