Tungaloy’s DrillForce-Meisterline of indexable head drills now includes drill bodies in diameters ranging from 20.0 – 25.9 mm (.787″ – 1.020″) in depth capacities of 3xD and 5xD, along with drill heads in diameters ranging from 20.0 – 25.5 mm (.787″ – 1.004″).
DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact surface to hold the drill head in place for secure stability during demanding large-diameter bore drilling with the IT9-IT10 hole tolerance.
Since the drill head can be exchanged without removing the drill body from the tool holder, setup time is significantly reduced, eliminating presetting, offset, and touch-off of the replaced tool.
The new drill bodies are available in diameters ranging from 20.0 – 25.9 mm (.787″ – 1.020″) in depth capacities of 3xD and 5xD, along with new SMP drill heads in diameters ranging from 20.0 – 25.5 mm (.787″ – 1.004″).
At a Glance
New lineup includes:
SMP drill heads: ø20.0 - 25.5 mm (.787″ – 1.004″)
3xD and 5xD drill bodies in diameters ø20.0 - 25.9 mm (.787″ – 1.020″)
Unique clamping design enables quick drill head exchanges while providing maximum head clamping
Solid clamping makes drilling on curved surfaces or unstable components easy and reliable
Tool setup time is reduced thanks to indexable technology
12 new drill bodies and 14 new drill heads are introduced in this expansion
BXA10 incorporates a crater-wear-resistant PcBN substrate and the latest multilayer PVD coating for edge toughness, enhancing the grade’s wear and fracture resistance. The latest development will provide improved productivity, tool life, and surface integrity in continuous to light interrupted cuts…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…
TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…
DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.
DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…
AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…
The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…
Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…
Tungaloy expands its TungCut series of grooving tools to include a parting blade CGP32-CHP with the ability to internally supply high-pressure coolant.
PRODUCTS
