Tungaloy Corp. announces the expansion for EasyMultiCut, the multi-functional tool series for grooving: the ETFR-CHP toolholder for face grooving with a coolant hole for high-pressure internal coolant supply. EasyMultiCut features a unique self-clamping insert that provides high tool rigidity.
The toolholder has no top clamping parts to hold down the insert, so smooth chip evacuation is possible in deeper grooving applications. Thus, EasyMultiCut delivers outstanding productivity even in face grooving operations where chip evacuation is usually difficult.
Also, the toolholder has a coolant hole, therefore ample coolant is constantly supplied to the cutting edge, achieving stable and long tool life.
Main features:
■ Applicable for face grooving with groove width 0.157” (4 mm); ø1.181” to 19.685” (ø30 to 500 mm)
■ Maximum groove depth: 0.984” (25 mm)
■ Excellent chip evacuation allows high speed machining, leading to incredible productivity.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
BXA10 incorporates a crater-wear-resistant PcBN substrate and the latest multilayer PVD coating for edge toughness, enhancing the grade’s wear and fracture resistance. The latest development will provide improved productivity, tool life, and surface integrity in continuous to light interrupted cuts…
DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact…
TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…
DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…
DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.
AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…
Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…
The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…
PRODUCTS
