FH3125 Grade Guide Pad

Contact Details

Tungaloy-NTK America, Inc.

Address

3726 N. Ventura Dr.

Arlington Heights

60004

IL

United States

Map It

Phone

630-227-3700

Toll Free Phone

888-554-8394

Fax

888-554-8392

View Website

Send Email

View Buyers Guide

June 04, 2020

FH3125 Grade Guide Pad Extends Tool Life of Deep Hole Drill

Tungaloy releases FH3125, a new guide pad grade for its indexable deep hole drill series, including DeepTri-Drill, TRI-FINE, FINE BEAM, and UNIDEX.

FH3125 is a new grade specifically developed to enhance the guide pad’s wear resistance in machining various materials. The dedicated carbide substrate of the grade is designed to reduce guide pad breakage, providing long and predictable tool life in deep hole processes. The corners of both ends of the guide pad are designed to allow smooth entry into the guide bushing or pilot hole to control vibration impact and further decrease the risk of rupture.

At a Glance

Extremely wear resistant, long tool life
Process reliability in various materials
Secure drill entry into the guide bushing or pilot hole thanks to a smart corner design on both ends of the guide pad
Introducing 13 items

Related Glossary Terms

bushing
bushing
Cylindrical sleeve, typically made from high-grade tool steel, inserted into a jig fixture to guide cutting tools. There are three main types: renewable, used in liners that in turn are installed in the jig; press-fit, installed directly in the jig for short production runs; and liner (or master), installed permanently in a jig to receive renewable bushing.
wear resistance
wear resistance
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.

Additional Products from Tungaloy-NTK America, Inc.

DrillForce-Meister Line With Smaller Drill Diameters

DrillForce-Meister Line of Indexable Head Drills in Range of Diameters

DrillForce-Meister incorporates a unique seat design that enables easy and swift drill head exchanges, while maximizing the clamping security, making drilling easy on curved surfaces, inclined exits, or components with a stability problem. The seat is designed with a maximum possible contact…

DrillMeister 12xD Drill Body

DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle, tool setup time can significantly be reduced, eliminating presetting, offset, and touch-off of…

10x12 mm TungTurn-Jet Toolholders

TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the…

DuoJust-Cut’s JXPS Insert

DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability in various parting operations. In addition to existing JXPG insert with a ground in chipbreaker on the rake face, the new JXPS insert incorporates a 3D chipbreaker pressed in to its “dual-rake” cutting edge which…

Expansion of Grade AH9130 to DMP Drill Head Line

DMP drill head are expanded in diameters from 10.3 mm through 19.8 mm

This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.

DrillMeister Chamfering Holders

DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in…

FineBeam BTA Drill Series AH8015 Grade Inserts

FineBeam BTA drill series to include AH8015 grade inserts with the G style chip former.

AH8015 consists of a nano-multilayered PVD coating with high aluminum content. This coating characteristic provides increased resistance against wear and built-up edge over existing grades, enabling long and predictable tool life during the machining of heat resistant superalloys and stainless…

SNG Coolant-Through Holders

Designed for the internal grooving of bores with diameters as small as 8.0 mm (.315″) up to 24.0 mm (.945″), while promising reliable chip evacuation. The shanks are made of either steel for economy or tungsten carbide for long reach areas where tool steadiness is vital. Virtually eliminate chip…

TungTurn-Jet System

The TungTurn-Jet system strategically directs the internal coolant jet exactly where it is needed, close to the cutting point on the insert rake face. This dramatically improves chip control during the machining of difficult-to-cut materials, which is not the case with conventional coolant delivery…

Parting Blade CGP32-CHP

Tungaloy expands its TungCut series of grooving tools to include a parting blade CGP32-CHP with the ability to internally supply high-pressure coolant.