ISCAR is introducing the IC806 — a new complementary SUMO TEC PVD coated grade for machining high temperature alloys, especially Inconel 718.
Inconel 718 belongs to a family of nickel based superalloys which are used extensively for applications where withstanding high temperatures and high corrosion resistance is required. This material is widely used in the aerospace industry for components which are placed in the hot section of the engine; and in additional sectors of the oil industry. The major problems encountered when machining Inconel 718 are characterized by very high temperatures on the cutting edge of the insert due to the abrasive elements in the material composition (high nickel content of 50-55 percent and chrome 17-21 percent) which causes high wear rates, chipping, notching and insert breakage.
These factors contribute to reduced tool life and high deformation of the cutting edge even at low cutting speeds. ISCAR's aim is to effectively machine this unique material, and has therefore successfully developed the IC806, which is a submicron grade with superior wear resistant properties and advanced PVD TiAlN.
IC806 has a hard submicron substrate with PVD coating and a special post coating treatment which provides substantially improved tool life and better reliability.
Substance used for grinding, honing, lapping, superfinishing and polishing. Examples include garnet, emery, corundum, silicon carbide, cubic boron nitride and diamond in various grit sizes.
Ability of an alloy or material to withstand rust and corrosion. These are properties fostered by nickel and chromium in alloys such as stainless steel.
Tool-coating process performed at low temperature (500° C), compared to chemical vapor deposition (1,000° C). Employs electric field to generate necessary heat for depositing coating on a tool’s surface. See CVD, chemical vapor deposition.
The double-sided CXMG inserts operate similarly to CCMT positive inserts and can therefore replace standard CCMT inserts. In some applications, they can also replace standard negative CNMG inserts.
Double-sided with a positive flank. Low cutting forces. Designed with a chipformer for general…
These inserts have 4 types of cutting geometries for machining different materials under diverse cutting conditions: T - Steel, ferritic and martensitic stainless steel, cast iron and hardened steel. HP - Austenitic stainless steel and high temperature alloys. RM-T - Interrupted cut for machining…
High positive cutter pocket inclination. Rigid clamping due to dovetail pocket design secured by clamping screws. Coarse and fine pitch cutter configurations. Coolant holes directed to every insert on the cutters. Precise double-sided square insert. Eight cutting edges – each edge comprises a…
Deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges). Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.
The chip splitter produces narrow chips for efficient chip evacuation, enabling high feed…
Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
Significantly improves insert tool life. Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw. No set-up time after blade or pocket indexing. Can be used next to…
The CHAM-IQ-DRILL design body is produced from special steel for high durability and a special stopper prevents the drilling head from being extracted upwards from the pocket. Long stoppers provide high resistance to cutting forces, enabling applications under very high cutting conditions. …
The DCN drills feature cylindrical shanks, which enable clamping of the drill in hydraulic toolholders (most recommended) or in spring collets. All drill bodies feature helical coolant holes. Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a…
The Pentacut HP Jet line from Iscar Metals Inc. combines the cost-effective Pentacut—which can be used in multifunction applications, including grooving, parting, recessing and chamfering—with innovative high-pressure coolant technology.
Iscar Metals Inc.’s Heli Tang T490 milling cutter for roughing accepts inserts with serrated, chip-splitting grooves. These grooves can improve performance when the machine power is limited or when evacuating chips from narrow slots or deep cavities, according to the company.
The increased popularity of Swiss-style machine tools and the need for fast tool indexing with high repeatability and precision has inspired Iscar Metals to develop small-diameter cutting tools with precision indexing. The new PiccoAce system allows easy quick and easy clamping with modularity…
PRODUCTS
