Modular Cutting Heads and Inserts

Contact Details

Tungaloy-NTK America, Inc.
Address
3726 N. Ventura Dr.
Arlington Heights
60004
IL
United States
Phone
630-227-3700
Toll Free Phone
888-554-8394
Fax
888-554-8392
January 28, 2023
DoMultiRec’s Multifunctional Machining Capability Expanded

Tungaloy has expanded its DoMultiRec multifunctional milling/drilling tool line by adding three additional diameter options of modular cutting heads and two new inserts with nose radius variations.

DoMultiRec multifunctional milling cutter with center cutting capability enables a single tool to perform multiple milling operations, including shouldering, pocketing, and drilling. A uniquely designed insert integrates a center and peripheral cutting edge on one side of the insert, and, since the insert is double sided, the same insert can be used either for the center or peripheral position for up to four indexings, front and back. This doubles the cost-per-edge economy when compared with conventional plunge milling cutters using single-sided inserts. Furthermore, the insert features -MM geometry that is developed specifically for the DoMultiRec inserts to ensure strong and sharp cutting edges during various milling and drilling operations.

The inserts are optimally arranged on the cutter so that they create a near-flat surface of the hole bottoms when drilling blind holes.

New modular cutting heads are available in 17 mm (.669″), 21 mm (.827″), and 26 mm (1.024″) diameters. When these cutting heads are coupled with the holders, respectively, with 16, 20, and 25 mm diameter shanks, they provide a clearance between the tool and the workpiece shoulder, allowing the tool to machine extremely close to the shoulder without the concern for tool collision.

Two new LXMU10T304PER-MM and LXMU120404PER-MM inserts have 0.4 mm (.016″) nose radii. They are especially effective when machining the shoulders requiring a corner radius of 0.5 mm (.020″) or smaller.

Related Glossary Terms

  • clearance

    clearance

    Space provided behind a tool’s land or relief to prevent rubbing and subsequent premature deterioration of the tool. See land; relief.

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • milling cutter

    milling cutter

    Loosely, any milling tool. Horizontal cutters take the form of plain milling cutters, plain spiral-tooth cutters, helical cutters, side-milling cutters, staggered-tooth side-milling cutters, facemilling cutters, angular cutters, double-angle cutters, convex and concave form-milling cutters, straddle-sprocket cutters, spur-gear cutters, corner-rounding cutters and slitting saws. Vertical cutters use shank-mounted cutting tools, including endmills, T-slot cutters, Woodruff keyseat cutters and dovetail cutters; these may also be used on horizontal mills. See milling.

  • plunge milling

    plunge milling

    Highly productive method of metal removal in which an axial machining operation is performed in a single tool sequence. The tool makes a series of overlapping, drill-like plunges to remove part of a cylindrical plug of material one after another. Because of the increased rigidity of a Z-axis move, the tool can cover a large cross-section of material.

Additional Products from Tungaloy-NTK America, Inc.

Featuring superior cutting performance of solid carbide drills and the ease-of-use of the DrillMeister exchangeable head drill series, AddMeisterDrill small-diameter exchangeable head drills allow quick and secure exchanges of extremely small drill heads thanks to its dedicated key. In addition,…

AddMultiTurn provides the flexibility for OD, face, and profile turning operations in multi directions, which include high-feed back (pull) turning method, allowing toolpaths that turn in the opposite direction of conventional turning process at higher feeds. Multi-directional turning optimizes the…

DrillMeister is a super productive, accurate, and cost efficient exchangeable-head drill series. Its DMF counterboring drill head line now includes diameters from 20.0 mm to 25.9 mm, increasing the entire standard range from 6.0 mm to 25.9 mm (from .236″ to 1.020″).

The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic…

The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.

New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally…

AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased…

The small size-04 inserts also allow TungForce-Rec04 to have a higher teeth density than conventional shoulder cutters of the same size, boasting two teeth for an 8 mm diameter cutter and three for a 10 mm. This allows TungForce-Rec04 to run higher feed speed than competitors when being fed at the…

For job shops that are mass-producing small parts with Swiss lathes, minimizing material waste in the part-off process can be an extremely effective solution for cost savings. The 1.2 mm-wide (.047″-wide) grooving inserts can reduce the material waste produced by parting-off by up to 40% when…

 20 inserts in HP-style chipbreaker are now available in WavyJoint style; namely, 4QS-CNGG1204..-HP, 4QS-DNGG1504..-HP, 6QS-TNGG1604..-HP, and 4QS-VNGG1604..-HP inserts. Conventionally, CBN cutting tips are brazed onto the seats ground, usually on one side, on a cemented carbide insert body to form…

PRODUCTS

11/20/2024
Jorgensen Conveyor and Filtration Solutions, Mequon, Wisconsin, highlighted its distinctive…

10/23/2024
The Starrett AVR400 offers full CNC capabilities including X-Y-Z positioning and comprehensive zoom…

10/23/2024
TIN Coated Thread Gages have high dimensionally stable HSS construction with TIN coating that…