TANG-GRIP Blades

Contact Details

Iscar USA

Address

300 Westway Place

Arlington

76018

TX

United States

Map It

Phone

817-258-3200

Toll Free Phone

877-BY-ISCAR

Fax

817-258-3221

View Website

Send Email

View Buyers Guide

April 01, 2010

Iscar Metals Inc. offers a family of reinforced TANG-GRIP blades for the INDEX Model MS18C and TRAUB TNL and TNK mill/turn machines. The blades are suitable for parting and grooving between the main spindle and subspindle. Because of their reinforced construction, the blades can be applied in long-overhang applications. Only the part of the blade needed for penetration has a reduced width. The rest is thick, which improves rigidity and stiffness, according to the company.

Related Glossary Terms

grooving
grooving
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
parting
parting
When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.
stiffness
stiffness
1. Ability of a material or part to resist elastic deflection. 2. The rate of stress with respect to strain; the greater the stress required to produce a given strain, the stiffer the material is said to be. See dynamic stiffness; static stiffness.

Additional Products from Iscar USA

Logiq4Turn

The double-sided CXMG inserts operate similarly to CCMT positive inserts and can therefore replace standard CCMT inserts. In some applications, they can also replace standard negative CNMG inserts.
Double-sided with a positive flank. Low cutting forces. Designed with a chipformer for general…

LOGIQ-4-FEED

These inserts have 4 types of cutting geometries for machining different materials under diverse cutting conditions: T - Steel, ferritic and martensitic stainless steel, cast iron and hardened steel. HP - Austenitic stainless steel and high temperature alloys. RM-T - Interrupted cut for machining…

Dove IQ MILL 845

Face Mills Carrying Double-Sided Square Inserts

High positive cutter pocket inclination. Rigid clamping due to dovetail pocket design secured by clamping screws. Coarse and fine pitch cutter configurations. Coolant holes directed to every insert on the cutters. Precise double-sided square insert. Eight cutting edges – each edge comprises a…

Trideep

Gundrill and Deep Drilling Heads Carrying Inserts with 3 Edges

Deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges). Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.
The chip splitter produces narrow chips for efficient chip evacuation, enabling high feed…

JETCROWN

Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
Significantly improves insert tool life. Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw. No set-up time after blade or pocket indexing. Can be used next to…

CHAM-IQ-DRILL

The CHAM-IQ-DRILL design body is produced from special steel for high durability and a special stopper prevents the drilling head from being extracted upwards from the pocket. Long stoppers provide high resistance to cutting forces, enabling applications under very high cutting conditions.
…

SumoCham

SumoChan Drills Feature 12xD Depth to Diameter Ratio

The DCN drills feature cylindrical shanks, which enable clamping of the drill in hydraulic toolholders (most recommended) or in spring collets. All drill bodies feature helical coolant holes. Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a…

Pentacut HP Jet Line of Multifunction Tools

The Pentacut HP Jet line from Iscar Metals Inc. combines the cost-effective Pentacut—which can be used in multifunction applications, including grooving, parting, recessing and chamfering—with innovative high-pressure coolant technology.

Heli Tang T490 Milling Cutter

Iscar Metals Inc.’s Heli Tang T490 milling cutter for roughing accepts inserts with serrated, chip-splitting grooves. These grooves can improve performance when the machine power is limited or when evacuating chips from narrow slots or deep cavities, according to the company.

PiccoAce Small-Diameter Cutting Tools

The increased popularity of Swiss-style machine tools and the need for fast tool indexing with high repeatability and precision has inspired Iscar Metals to develop small-diameter cutting tools with precision indexing. The new PiccoAce system allows easy quick and easy clamping with modularity…