Made in Kentucky, the simple but innovative Mazak VC-300A vertical machining center with 3-axis table can take 40-taper cuts in hard-to-machine 410 stainless material on a typical 30-taper-sized machine.
In addition to its small footprint and easy installation, the VC-300A provides effortless programming in either Mazatrol conversational language or EIA/ISO for faster part cycle times thanks to its Mazatrol SmoothG CNC. It has a high-performance CAT-40, 12,000-rpm grease-pack spindle that delivers exceptional metal removal in not only tough-to-machine materials but also common ones such as steel, aluminum and cast iron.
With a new standard 30-tool magazine capacity, the VC-300A helps reduce setup time and allows for redundant tooling, as well as for more tooling dependent part production.
To simplify tool changing, the machine’s spindle clamps on to tools in the magazine to eliminate the use of a separate automatic toolchanger. Axis travels for the VC-300A measure 11.81" in X, 11.81" in Y and 20.08" in Z. In these three axes, the machine rapids at speeds up to 945 ipm.
Mechanism typically included in a machining center that, on the appropriate command, removes one cutting tool from the spindle nose and replaces it with another. The changer restores the used tool to the magazine and selects and withdraws the next desired tool from the storage magazine. The changer is controlled by a set of prerecorded/predetermined instructions associated with the part(s) to be produced.
Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.
Value that refers to how far the workpiece or cutter advances linearly in 1 minute, defined as: ipm = ipt 5 number of effective teeth 5 rpm. Also known as the table feed or machine feed.
Carriage or drum attached to a machining center that holds tools until needed; when a tool is needed, the toolchanger inserts the tool into the machine spindle. See automatic toolchanger.
Models within the new turning machine series include the QT-Ez 8, QT-Ez 10 and QT- Ez 12 each offered in 2-axis, M, MY and MSY versions. M versions include milling capability, MY machines feature milling and Y-axis off-centerline capability and MSY machines are a combination of both milling and Y…
Introduced to the U.S. market, the Variaxis C-600 from Mazak Corp. is an advanced 5-axis solution with a wide variety of optional features, automation-ready machine enclosure, operator-friendly ergonomic design and significantly improved productivity. This all-new machine leverages 40% faster rapid…
Mazak Corp. offers the SQR-250 turning center for the fast, accurate production of long shaft or chucked workpieces. The machine features a powerful single spindle with two 45-degree opposed-wedge style turrets that cut simultaneously to slash cycle times and provide balanced cutting.
Mazak Corp.'s VCN-575C vertical machining center brings advanced technology, performance and value to heavy-torque machining applications. Made in Kentucky, the machine features a traditional C-frame design, vibration damping, rigid base and headstock/column castings for extreme stability.
Mazak Corp. offers the VC-500 AM hybrid multitasking machine, which combines full 5-axis subtractive capability and additive technology to enhance product design, reduce time to market and cut R&D costs. Designed and manufactured in the Mazak iSmart Factory, the compact, cost-effective VC-500…
Mazak Corp. offers the Integrex i-100 Bartac-S multitask machine, which incorporates enhanced CNC technology and high-speed servo systems to offer high levels of productivity when processing small high-precision parts in
single setups, as well as machining bar material up to 4" in…
Mazak Corp.'s VC-500C/2PC vertical machining center brings a compact design and increased production capabilities for small to medium part machining in a variety of industries. The 3-axis machine debuted its new 40” inline two-pallet changer with rotary table mounted on one pallet and multiple…
Mazak Corp.'s Ultimate Die & Mold (UD) 400/5X 5-axis vertical machining center is suitable for applications ranging from medical and dental instruments to mold and die components and beyond. The machine sports a rigid composite base and double-column symmetrical construction that allow its…
Mazak Corp.'s family of hybrid multitask machining centers includes the VTC-300C FSW, which combines advanced milling capabilities with friction stir welding (FSW) technology. With a full traveling-column design, automatic toolchanger and powerful 40-taper spindle in addition to the FSW…
Mazak Corp.'s VC-500A/5X vertical machining center cost-effectively processes small complex parts, such as throttle bodies, with the full 5-axis machining enabled by the machine’s trunnion-style rotary/tilt table. The machine features the Mazatrol SmoothX CNC, a control that delivers many…
PRODUCTS
