Composite Resources
Resources
Composite Resources
Explore 81 published CTE resources related to Composite across 22 articles, 44 products, 5 videos, and 10 news items.
22
Articles
44
Products
5
Videos
10
News
Articles
22 articles
Products
44 products
Videos
5 videos
News
10 news items
Cellulose-based components mass produced with AP&T press line
CGTech announces worldwide reseller agreement
AM-produced mandrels provide new market opportunities
Composites manufacturing with advanced programming strategies
Composite material cutters offer a growing opportunity for toolmakers
The next generation of surface profilometer for in-process inspection
Browse
Browse all Composite resources
Browse results
Gleason renames Distech Systems
The Gleason Corp. announced a new name and operating structure for Distech Systems effective Jan. 1, 2016. Acquired in May 2014, Distech will now do business as Gleason Automation Systems, and will operate as a division of The Gleason Works.
Carbide Cold Heading Punches and Pins
Helfer Tool Co., Santa Ana, Calif., offers carbide cold heading tools, including carbide extrusion pins, carbide punches, and carbide hammer pins. Please give Helfer Tool a call, e-mail and attach a CAD file, or fax us a print for a prompt competitive quote.
Thread Chaser Insert
Seco developed its new thread chaser insert holder to bring high levels of precision and rigidity to threading operations that involve tough materials including the hard, gummy or high-chrome content ones used in the oil and gas industry. Such achievement is possible via a special carbide-pin locating system combined with a patented pocket seat surface pattern and high-pressure coolant capabilities.
Interstate Fly Cutter Sets
Fly Cutter Sets; Minimum Head Diameter (Inch): 3/4; Maximum Head Diameter (Inch): 2-1/2; Shank Diameter (Inch): 1/2; 5/8; Minimum Tool Bit Size (Inch): 3/16; Maximum Tool Bit Size (Inch): 1/2; Number of Bits Per Cutter: 1.
Super Flex Flexible Diamond Finishing Files
Titan Tool Supply Inc. announces the introduction of its new line of flexible diamond finishing files for the removal of material in the maintenance of extrusion dies, aircraft components, and other difficult-to-reach areas for conventional means of finishing. They are designed for working with materials such as tungsten carbide, stone and marble, composite materials, industrial ceramics, reinforced plastics, fiberglass, ferrite materials, nonferrous materials, rubber, and glass.
Straddle knurling tool
Conventional "bump" knurling methods are undesirable for smaller diameter parts because the forces deflect the workpiece, according to Genevieve Swiss Industries Inc., Westfield, Mass. To control this problem, the company recommends using a straddle knurl holder to provide support to the workpiece while the knurling operation is performed.
HDZ Collet Holders
Even with minimal runout near the nose of the holder, conventional collet holders frequently see larger runout when measured at the cutting edge of longer tools. NT Tool's original "R" Zero system eliminates this problem by utilizing a four-point adjustment mechanism to adjust runout at the tool tip to as low as 0µm to 2µm.
Top Cut 4 Indexable Drill
The new Top Cut 4 indexable drilling platform from WIDIA is targeted to end users that machine a broad assortment of products and need one drill for a variety of drilling applications and workpiece materials.
SHEARDRILL
Morse Cutting Tools has a companion for its popular SHEARTAP, the new SHEARDRILL. The SHEARTAP is a go-to tool in the Morse Tap Offering and like its companion, the SHEARDRILL, is designed to run in a wide variety of materials providing a performance production solution.
OMAX expands abrasive waterjet training program
OMAX® Corp., a global leader in advanced abrasive waterjet technology, has increased the capacity of its state-of-the-art training center in Kent, Wash., to provide OMAX and MAXIEM® JetMachining® Center owners with enhanced resources for improved productivity and profitability. As a key element of the company's headquarters and manufacturing campus, the training center features a new technology classroom that supplements an existing equipment lab.
Haas to host March open house
Haas Automation Inc. will host its semi-annual 4-day HaasTec open house at its Oxnard, Calif., headquarters March 17-20. The event will include machine demos, factory tours and a catered lunch, according to the company. The previous HaasTec in 2013 drew nearly 3,000 attendees from 44 countries, and the company expects this year's event to be even bigger.
Shigiya holds grand opening of new U.S. headquarters
The opening of the new facility included a traditional Japanese Kagami-Biraki ceremony, where a barrel of sake is broken open with wooden mallets. Several customers, dealership representatives, city officials, Shigiya employees and other invited guests were present for the event.
