Machines/Accessories/Controls

The MIXO right-angled high-current rectangular connector modules (CX-01YA) are designed to minimize space installation requirements with a compact 90° connection that removes bending of large diameter wires (up to 70mm2) and ensures reliable 200A rating performance. The main feature of this new module is the special insulating cover plate that can not only prevent accidental contact between cable lugs on adjacent modules but also save the nominal voltage rating of 1000V planned for the 200A modules while connecting the DIN 46235 pre-insulated crimp cable lugs.

WDS Components LTD has extended its three spoke aluminium handwheel range, adding a solid wheel plus a two spoke design. The solid handwheels increase safety by removing the risk of finger trap, ideal if greater speed of rotation is required or for use in more hazardous environments.

The rectangular power connectors series (CX-8/0) feature safe crimp termination. Compared to other rectangular inserts using the axial screw termination, the CX-8/0 series with crimp technology is more resistant to mechanical stresses such as vibration, shock, and strain on wire strands. When mated, the connection is sealed and gas-tight, thereby preventing corrosion on the metal contacts and performing consistent and efficient connectivity with lower voltage drop. Also, the crimp termination helps to reduce wire termination time and therefore shortens the overall connection time.

The levers are available with L or T shaped handles. With the L shaped clamping handle, it can be lifted and moved back to continue tightening in the presence of an obstruction. The T handle enables less flexibility of movement but enables easy adjustment with a two-sided grip option. Both designs are ideally suited to tightening clamps on machinery or jigs, through to adjusting the position of office or domestic equipment.

The operational temperature of the Mencom standard metal rectangular connectors is between -40°C and 125°C. However, the Mencom high-temp series enclosures and inserts are designed to withstand a higher range of temperatures up to 180°C (356°F) and cold temperatures down to -40°C (-40°F) when they are installed together. The enclosures are made of die-cast aluminum coated with high-temperature resistant, red-colored thermosetting powder.