Measuring/Inspecting

2900 and W2900 Indicators

Starrett 2900 Series Indicators are equipped with RS232 output and compatible with 2900 SCM, SCU and SCKB cables, while Starrett W2900 Series Indicators, which have all the same features and capabilities of the 2900 series, are fully wireless and equipped to send data for SPC analysis at the push of a button with no cables required. Both the 2900 and W2900 series are available in ½ “, 1”, 2” ranges and new 4” range models, inch-metric models in 1/2", 1", 2" (12 mm, 25 mm and 50 mm) and metric only models in 12 mm, 25 mm and 50 mm ranges.

M62 Laser Profiler

The laser profilers project a laser line on the gear at a specific angle, collecting data to generate the entire Z-X profile through an image sensor placed behind the optical receiver. The gear is then quickly rotated 360° to collect data points from movement along the Y axis, which is combined with the Z-X profile to create a complete 3D reconstruction of the part, made possible through specific software algorithms. The system then executes the requested measurement and inspection tasks. Line operators can easily review images and navigate to the desired level of detail to identify any anomalies.

FlexPoint 12-Series

Made for large, heavy parts with complex dimensions and tolerances, FlexPoint 12-Series measures volumes up to 1200 x 3000 x 1000 mm. The VersaFlex multisensor head is a patented sensor array that offers up to three simultaneously available sensors on one articulating head: OGP SmartProbe fully telecentric optical video probe, SP25 scanning probe, and the interferometric laser TeleStar Probe.

TurnCheck Series-14 Shaft Measurement System

TurnCheck systems are precision optical instruments that measure shafts, cylinders, and other turned, ground, or extruded parts in the most demanding shop floor environments. The fully telecentric large field of view optics combined with highly collimated light at a constant wavelength results in a crisp, uniformly magnified image with no edge effects or exclusion zones. TurnCheck systems scan and measure all points and features automatically, handling the full range of dimensions and tolerances found on shafts and cylinders.

SmartScope E7 Multisensor Metrology System

OGP has reimagined the trusted SmartScope system to be accessible for all skill levels and budgets. SmartScope E7 features the brand-new fixed lens IntelliCentric optical system, a fully telecentric optical system that provides a super high-resolution image perfect for video edge detection. The digital zoom allows for instantaneous magnification changes, while the standard all-LED lighting system provides illumination from all angles.

ShapeGrabber Ai320, ShapeGrabber Ai820

ShapeGrabber 3D Laser Scanning systems are metrology-class machines that combine powerful laser and camera technology to capture up to 1.5 million data points per second. At the heart of each ShapeGrabber system is a high-resolution scanhead offering dynamic range that delivers fast and accurate measurement of parts in a wide variety of materials, colors, textures, and finishes.

ACU-RITE DRO203Q

Users of optical comparators and measuring microscopes and more will find this of particular interest as it meets the need for basic 2D metrology functions. The Q functions as an entry-level readout, providing the user with geometric feature construction, basic part view detail and data output via USB-C connection.  This enables users to quickly gather the needed points, construct desired features, and export them easily over a modern interface.

Digimar 817 CLT

The Digimar 817 CLT provides a variety of interfaces for saving measurement data. Data transfer is possible both wirelessly and by the new duplex cable via the proven MarConnect data management software. It also allows the transmission of a measuring device ID to ensure the traceability of all measurement results. For measurement reports, users can choose between complete representations in PDF format, sending individual measured values to a PC, Bluetooth printer or saving as a TXT file.

Laser Contour Check

The blue laser, paired with an intelligent measuring system, provides high-precision measurement of various tool parameters on cylindrical tools with diameters from one to 52 mm. Since it does not contact the surface, the Laser Contour Check avoids possible damage to cutting edges or measuring errors that can occur due to wear on the probe tip during tactile measurements.

Quick Vision Pro Series

The QV Pro Series features newly developed StrobeSnap vision measuring function that speeds up run time by approximately 35 to 45 percent regardless of measurement position or continuity while achieving higher throughput and high-precision measurements. Auto focus on the QV Pro Series is about 39 percent faster than previous models, which were already fastest in their class, without loss of accuracy.