Feature Article

Tangential cutting force helps shops estimate torque, spindle load, and stability in milling. This guide explains what the force means and how to use it in setup decisions.

Learn details about the many new products that manufacturers are offering to the metalworking industry in Cutting Tool Engineering's May 2012 Product Showcase.

Can vertical machining centers go toe-to-toe with horizontals on performance?

More shops and builders are remotely monitoring machine tools, which quickens maintenance and repair.

Boring is a common hole finishing operation, but boring large-diameter holes is a bit of a niche market. "Depending on the industry, you may only find a handful of shops in some areas capable of doing this type of work," said Ron West, global product manager for Kennametal Inc., Latrobe, Pa. "They have the larger equipment necessary to do this type of work on a regular basis."

When loading a toolholder into a machine tool spindle with an automatic toolchanger, misalignment of the ATC gripper to the spindle can damage the spindle taper. In addition, a misaligned, clamped toolholder increases cutting tool runout.

Applying 'green' coolant to maintain machining performance while being friendly to workers and the environment.

For the first time as a combined company, DMG/Mori Seiki hosted the open house held annually at the Deckel Maho Pfronten (Germany) GmbH plant. The event took place Feb. 7 to 11 and reportedly drew more than 5,000 industry professionals from around the world.

United Grinding Technologies Inc. celebrated 30 years in its Fredericksburg, Va., location with an open house on Feb. 22 and 23. The event included technical presentations, facility tours and a ribbon-cutting event for the newly expanded and renovated facility.

Amada Machine Tools demonstrated its new S-10 modular multitask machine during a recent press briefing at its Technical Center in Schaumburg, Ill.

Workholding involves much more than slapping a part in a vise or chuck and pushing the cycle-start button, according to the Workholding column in the April 2012 issue of Cutting Tool Engineering magazine.

Aluminum parts that are anodized using electrical energy or chromate conversion coated can offer wear and corrosion resistance, among other benefits.