Industry News

The Wonkblog, a regular business feature on The Washington Post website, tackled the need for skilled labor among U.S. manufacturers in its Dec. 15 post. The news item features the plight of the Mursix Corp., an Indiana company that produces seatbelt buckles and bed frames, and has had trouble finding skilled workers to help keep up with the company's growth. It's a story that's been repeated throughout the news media on a fairly regular basis for the past couple of years. What caught my eye with this particular article, however, was a comment from Michael Hicks, a business professor at Ball State University in Muncie, which is where Mursix is located.

A group of long-term unemployed men last week received high-tech manufacturing training certificates from the Central Massachusetts Workforce Investment Board and MACWIC (Manufacturing Advancement Center Workforce Innovation Collaborative) at the Massachusetts Manufacturing Extension Partnership (MassMEP) in Worcester, Mass.

Buy a used drill chuck, which didn't work flawlessly to begin with, for almost $50,000? Sounds like a bid for lunacy. And it is, literally. Auction house RR Auction recently took bids on the chuck that was part of the lunar-surface drill used on the Apollo 15 mission by Commander Dave Scott in 1971.

Ames Laboratory and Oak Ridge National Laboratory have been awarded $5 million from the U.S. Department of Energy’s Advanced Manufacturing Office (AMO) to improve the production and composition of metal alloy powders used in additive manufacturing.

Students at the Middlesex County Vocational and Technical Schools in East Brunswick, N.J., recently earned some media attention for making a device that enables a disabled man to toss a ball from his wheelchair and play fetch with his service dog.

After robot builder MegaBots Inc. determined that its Mk. II robot was unsafe for the two human pilots to operate during the upcoming Giant Robot Duel against Japan-based Suidobashi Heavy Industry’s Kuratas robot, the Hayward, Calif.-based company decided to build a new robot from scratch. 

Attendees at the IMTS 2016 trade show may have noticed a number of magnetic “hybrid” signs affixed to several brands of machine tools. The man largely responsible for the signs being displayed is Jason Jones, inventor of the AMBIT laser cladding head and co-founder of Hybrid Manufacturing Technologies Inc., Plano, Texas. 

For 10 years, FANUC Corp.’s highly accurate ROBONANO automated milling machines have been in use in Japan’s semiconductor industry. Now the newest iteration of the machine is in the U.S. to help researchers studying emerging materials and manufacturing processes. 

As useful and commonplace as robots are in manufacturing, buying one is rarely a one-stop shopping experience. However, robot manufacturer Universal Robots A/S has launched a new service, UR+, which may change the way robots are bought and sold. 

A look at "how manufacturers make the most of machine data" in CIO magazine goes over the challenges as well as the benefits of using ERP. A major source for the article is Magnus Wiktorsson, professor of production systems at Mälardalen University in Sweden. Wiktorsson outlines four key challenges for companies looking to digitize their manufacturing processes, which are worth reading.

A circular shape provides multiple benefits in the machining world. For example, round inserts are stronger than inserts with any other shape. However, when it comes to coolant channels in cutting tools and toolholders, channels that don’t have circular cross sections can enhance operations.

Have a great idea for a machine tool but lack the cash to fund its commercialization? Crowdfund it! That’s what Matthew Hertel did when he leveraged a Kickstarter campaign to raise more than $355,000 for the development and creation of his Pocket NC 5-axis milling machine. And then there's the WAZER, the world’s first desktop waterjet cutter, which runs $4,499 on Kickstarter, and is expected to be affordable to hobbyists and small businesses.

The Quaker Chemical Corp., Conshohocken, Penn., acquired Lubricor Inc., a Canadian metalworking fluids manufacturer, in a deal announced Dec. 1. Lubricor, which manufactures and markets value-added metalworking products such as synthetic and semi-synthetic coolants, hydroforming fluid, and stamping products, sells directly to primarily Tier 1 and Tier 2 automotive suppliers in North American, according to a Quaker news release.

A partnership between AMT – The Association For Manufacturing Technology,  McLean, Va., and the National Institute for Metalworking Skills (NIMS) is expected to increase access to apprenticeships and assist employers in developing new programs that reach diverse talent pools, according an AMT news release issued Nov. 15.

The Associated Press is reporting that air-conditioner manufacturer Carrier Corp. has reached a deal with President-elect Donald Trump to keep nearly 1,000 jobs in Indiana. Last February the company had said it would close the Indianapolis plant, lay off its 1,400 workers there and relocate the work to Mexico.

The Janesville, Wis., micromanufacturer Performance Micro Tool is part of a Janesville Gazette feature on local companies increasing their use of automation. The article notes that a recent source of revenue for the company is a tool contract with a company that makes the tiny housings in credit cards that hold those now-ubiquitous micro chips.

Carr Lane Manufacturing CEO Nance Frost recently announced the promotion of Colin W. Frost to Chief Operating Officer of the company, which is headquartered in St. Louis. Known primarily for jig & fixture components, Carr Lane Manufacturing offers more than 100,000 products, including quick-change tooling plates and accessories, hoist rings, toggle clamps, handles, knobs, ball and spring plungers, threaded inserts, clamp straps, drill bushings, alignment pins, fixture bases, and power workholding devices.

To spur significant innovation and growth in advanced manufacturing, as well as save over $100 billion annually, U.S. industry must rectify currently unmet needs for measurement science and "proof-of-concept" demonstrations of emerging technologies. This is the overall conclusion reached by economic studies funded by the National Institute of Standards and Technology (NIST) of four advanced manufacturing areas used to create everything from automobile composites to zero-noise headsets.

In a guest editorial, CEO and author Steven L. Blue argues that “Smart manufacturing should start with people, not machines” and that companies should “start by building a workforce that is engaged, enlightened, and empowered. A workforce that trusts in its leadership.”

Kyocera Group is exhibiting a range of newly developed metalworking tools at the Japan trade show JIMTOF 2016. These will include the new CA3 Series CVD coated carbide indexable cutting tool inserts for cast iron machining; the Magic Drill DRA, a high-performance modular drill; and the MFH Micro, a tiny-caliber high-feed cutting tool.