CH-CM0406 Cut Pre-Point Chamfer Machine

Contact Details

Rush Machinery

Address

4761 Route 364

Rushville

14544

NY

United States

Map It

Phone

585-554-3070

Toll Free Phone

800-929-3070

Fax

585-554-4077

View Website

Send Email

View Buyers Guide

October 24, 2018

The CH-CM0406 Cut Pre-Point Chamfer Machine makes carbide blanks that are ready for tool grinding. The machine converts blank carbide rods into tool blanks. It is suitable for cutting tool manufacturers that want to make tools from a blank that is already pre-pointed and chamfered. The machine is easy to setup and runs unattended.

Pre-point angles are generated through interpolation. The interpolation is automatically calculated based on parameters entered by the operator during setup. The parts are held in place by two collets and the part is transferred from the cut and pre-point collet to the chamfer collet directly. A transfer device deposits the completed piece into the collection basket.

Related Glossary Terms

collet
collet
Flexible-sided device that secures a tool or workpiece. Similar in function to a chuck, but can accommodate only a narrow size range. Typically provides greater gripping force and precision than a chuck. See chuck.
grinding
grinding
Machining operation in which material is removed from the workpiece by a powered abrasive wheel, stone, belt, paste, sheet, compound, slurry, etc. Takes various forms: surface grinding (creates flat and/or squared surfaces); cylindrical grinding (for external cylindrical and tapered shapes, fillets, undercuts, etc.); centerless grinding; chamfering; thread and form grinding; tool and cutter grinding; offhand grinding; lapping and polishing (grinding with extremely fine grits to create ultrasmooth surfaces); honing; and disc grinding.
interpolation
interpolation
Process of generating a sufficient number of positioning commands for the servomotors driving the machine tool so the path of the tool closely approximates the ideal path. See CNC, computer numerical control; NC, numerical control.

Additional Products from Rush Machinery

RushCut Cut-Off Machine

Based on the Easy-Cut, the new and improved RushCut is a fully enclosed semi-automatic cut- off machine, designed for quick and easy cutting of carbide rod, high speed steel, and tool ends with diameters between 1/8′′ (3.175 mm) to 1-1/4′′ (31.75 mm). PLC controlled, the RushCut has air actuated…

CNC Auto-Cut Cut-Off Machine

Designed for cutting tool manufacturers and carbide rod processors, this production machine can significantly increase your production rate for cutting carbide and hardened steel rod when compared with manual cut-off machines. It's easy-to-use CNC controls and touch screen operator interface…

Truing Parameters Calculator

The Truing Parameters Calculator is the result of a 3-year collaboration between Rush Machinery, the International Grinding Institute, and Dr. Jeffrey Badger, the ‘Grinding Doc’. Rush Machinery commissioned the project that was later presented at the 2008 CIRP General Assembly in Tokyo by…

FC-350EX and FC-350W Wheel Truing and Dressing Machines

Rush Machinery offers the Model FC-350EX and Model FC-350W wheel truing and dressing machines, designed for truing and dressing flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs.

CH-CM0203 CNC Carbide Rod Chamfer Machine

Rush Machinery is offering the CH-CM0203 CNC Carbide Rod Chamfer Machine for chamfering blanks for carbide and HSS cutting tools. The machine comes equipped with a large-capacity magazine, an automatic loader, a flood coolant system, 2-axis servomotor and servo amplifier, and fully automatic CNC.

2 Rod “Auto-Cut” CNC Carbide Cut-Off Machine

The 2 Rod “Auto-Cut” CNC Carbide Cut-Off Machine automatically cuts carbide rod into precision lengths. This production machine, designed for cutting tool manufacturers and carbide rod processors, has a large-capacity magazine and an automatic loader to provide hours of unattended operation.

Easy-Cut XL Semiautomatic Carbide Cut-Off Machine

Rush Machinery offers the new Rush Easy-Cut XL semiautomatic carbide cut-off machine for quick and easy cutting of carbide flat stock up to 2”x4” or rod and tool ends with diameters between 1/8” to 2”.

BMT-150M On-Machine Balancing Kit

The BMT-150M On-Machine Balancing Kit from Rush Machinery for balancing wheels and wheel packs on truers or grinding machines. The kit comes with everything you need to get started.

FC-200D, FC-300D, FC-500D and FC-200CNC Tool Grinders

Rush offers the Models FC-200D, FC-300D, FC-500D and FC-200CNC polycrystalline tool grinders, which allow for economical manufacturing and regrinding of PCD, CVD, PCBN, carbide and HSS tools. These machines grind angles and radii on standard and special turning and milling inserts, boring tools,…

Drill and Tool Grinders

Rush Machinery Inc.'s Drill and Tool Grinders have helped thousands lower their holemaking costs through higher precision, faster production, less down time and reduced tool inventory.